# Messages for Russian (Русский) # Exported from translatewiki.net # Export driver: syck # Author: Calibrator # Author: Александр Сигачёв ru: a_poi: $1 точки интереса (POI) a_way: $1 линию action_addpoint: добавление точки в конец линии action_cancelchanges: отмена изменений к action_changeway: изменения в линии action_createparallel: создание параллельных линий action_createpoi: создание точки интереса (POI) action_deletepoint: удаление точки action_insertnode: добавление точки в линию action_mergeways: соединение двух линий action_movepoi: перемещение точки интереса (POI) action_movepoint: перемещение точки action_moveway: перемещение линии action_pointtags: установка меток для точки action_poitags: установка меток для точки интереса action_reverseway: изменение направления линии action_revertway: возвращение линии action_splitway: разделение линии action_waytags: установка меток на линию advanced: Меню advanced_close: Закрыть пакет правок advanced_history: История линии advanced_inspector: Инспектор advanced_maximise: Развернуть окно advanced_minimise: Свернуть окно advanced_parallel: Параллельная линия advanced_tooltip: Расширенные действия по редактированию advanced_undelete: Восстановить advice_bendy: Слишком большой изгиб для спрямления (SHIFT для выполнения) advice_deletingpoi: Удаление точки интереса (Z для отмены) advice_deletingway: Удаление линии (Z для отмены) advice_nocommonpoint: Линии не имеют общей точки advice_revertingpoi: Возвращение к последней сохранённой точке интереса (Z для отмены) advice_revertingway: Возвращение к последней сохранённой линии (Z для отмены) advice_tagconflict: Метки не совпадают, пожалуйста проверьте (Z для отмены) advice_toolong: Длина слишком велика. Пожалуйста, разделите на более короткие линии advice_uploadempty: Нет данных для загрузки advice_uploadfail: Загрузка остановлена advice_uploadsuccess: Все данные успешно загружены advice_waydragged: Линия передвинута (Z для отмены) cancel: Отмена closechangeset: Закрытие пакета правок conflict_download: Загрузить чужую версию conflict_overwrite: Записать поверх чужой версии conflict_poichanged: После того, как вы начали редактирование, кто-то изменил точку $1$2. conflict_relchanged: После того, как вы начали редактирование, кто-то изменил отношение $1$2. conflict_visitpoi: Нажмите «OK», чтобы увидеть точку. conflict_visitway: Нажмите «OK», чтобы показать линию. conflict_waychanged: После того, как вы начали редактирование, кто-то изменил линию $1$2. createrelation: Создать новое отношение custom: "Особая:" delete: Удалить deleting: удаление drag_pois: Перетащите объекты на карту editinglive: Править вживую editingoffline: Правка оффлайн emailauthor: "\\n\\nПожалуйста, отправьте сообщение об ошибке на электронную почту: richard\\@systemeD.net, с указанием того, какие действия вы совершали." error_anonymous: Вы не можете связаться с анонимным картографом. error_connectionfailed: Извините, соединение с сервером OpenStreetMap разорвано. Все текущие изменения не были сохранены.\n\nПопробовать ещё раз? error_nopoi: Точка интереса (POI) не найдена (возможно вы отошли в сторону?), поэтому не может быть отменена. error_nosharedpoint: Линии $1 и $2 больше не содержат общих точек, поэтому невозможно отменить разделение. error_noway: Линия $1 не найдена (возможно вы отошли в сторону?), поэтому невозможно отменить. error_readfailed: Извините, сервер OpenStreetMap не ответил на запрос данных.\n\nЖелаете ли попробовать ещё раз? existingrelation: Добавить в существующее отношение findrelation: Найти отношения, содержащие gpxpleasewait: Пожалуйста, подождите — GPX-треки обрабатываются. heading_drawing: Рисование heading_introduction: Введение heading_pois: Начало работы heading_quickref: Краткий справочник heading_surveying: Геодезия heading_tagging: Пометка heading_troubleshooting: Устранение проблем help: Справка help_html: "Добро пожаловать в Potlatch\nPotlatch очень простой в пользовании редактор OpenStreetMap. Рисуйте дороги, пути, достопримечательности и магазины положение которых определено вами с помощью GPS, спутниковых снимков и старых карт.\n\nЭти справочные страницы помогут вам получить первое представление об основах работы с Potlatch и расскажут вам, где узнать больше об этом редакторе. Листайте страницы, нажимая на названия разделов в шапке этого справочника.\n\nКогда вы захотите закрыть окно справочника - щёлкните где-нибудь рядом с окном справочника.\n\n\n\nПолезные вещи, которые надо знать\nНе копируйте из других карт! \n\nЕсли вы выберите 'Правка вживую', любые изменения, которые вы сделаете, поступят в базу, как только вы нарисуете их, то есть сразу. Если вы любите много править и дорабатывать по ходу редактирования, воспользуйтесь 'Правка с сохранением', в этом случае изменения будут переданы на сервер только после того, как вы нажмёте 'Сохранить'.\n\nЛюбые правки, которые вы сделаете отобразятся на карте толкьо через час или два (некоторые сложные только через неделю). Не все будет отображено на карте, чтобы не выглядеть слишком запутанно. \n\nТак как данные OpenStreetMap - открытый ресурс, другие люди вольны создавать специальные карты на их основе - подобно OpenCycleMap (Открытые велосипедные карты) или Midnight Commander.\n\nЗапомните эти обе красивые карты (чтобы рисовать плавные съезды с дорог) и диаграммы (чтобы не забывать соединять дороги на перекрёстках).\n\nДа, вы помните правила копирования из других карт?\n\n\nПолезные ссылки:\nСправочник по Potlatch\nСписки рассылок\nOnline chat (live help)\nРусскоязычный форум\nСправка и Вики\nИсходный код Potlatch\n\n\n\nНачало работы\nNow that you have Potlatch open, click 'Edit with save' to get started.\n\nSo you're ready to draw a map. The easiest place to start is by putting some points of interest on the map - or \"POIs\". These might be pubs, churches, railway stations... anything you like.\n\nDrag and drop\nTo make it super-easy, you'll see a selection of the most common POIs, right at the bottom of the map for you. Putting one on the map is as easy as dragging it from there onto the right place on the map. \n\nAnd don't worry if you don't get the position right first time: you can drag it again until it's right. Note that the POI is highlighted in yellow to show that it's selected.\n\nOnce you've done that, you'll want to give your pub (or church, or station) a name. You'll see that a little table has appeared at the bottom. One of the entries will say \"name\" followed by \"(type name here)\". Do that - \n\nclick that text, and type the name.\n\nClick somewhere else on the map to deselect your POI, and the colourful little panel returns.\n\nEasy, isn't it? Click 'Save' (bottom right) when you're done.\nMoving around\nTo move to a different part of the map, just drag an empty area. Potlatch will automatically load the new data (look at the top right).\n\nWe told you to 'Edit with save', but you can also click 'Edit live'. If you do this, your changes will go into the database straightaway, so there's no 'Save' button. This is good for quick changes and mapping parties.\n\nNext steps\nHappy with all of that? Great. Click 'Surveying' above to find out how to become a real mapper!\n\nSurveying with a GPS\nThe idea behind OpenStreetMap is to make a map without the restrictive copyright of other maps. This means you can't copy from elsewhere: you must go and survey the streets yourself. Fortunately, it's \n\nlots of fun!\n\nThe best way to do this is with a handheld GPS set. Find an area that isn't mapped yet, then walk or cycle up the streets with your GPS switched on. Note the street names, and anything else interesting (pubs? \n\nchurches?) , as you go along.\n\nWhen you get home, your GPS will contain a 'tracklog' recording everywhere you've been. You can then upload this to OpenStreetMap.\n\nThe best type of GPS is one that records to the tracklog frequently (every second or two) and has a big memory. Lots of our mappers use handheld Garmins or little Bluetooth units. There are detailed GPS Reviews on our wiki.\nUploading your track\nNow, you need to get your track off the GPS set. Maybe your GPS came with some software, or maybe it lets you copy the files off via USB. If not, try GPSBabel. Whatever, you want the file to be in GPX format.\n\nThen use the 'GPS Traces' tab to upload your track to OpenStreetMap. But this is only the first bit - it won't appear on the map yet. You must draw and name the roads yourself, using the track as a guide.\nUsing your track\nFind your uploaded track in the 'GPS Traces' listing, and click 'edit' right next to it. Potlatch will start with this track loaded, plus any waypoints. You're ready to draw!\n\nYou can also click this button to show everyone's GPS tracks (but not waypoints) for the current area. Hold SHIFT to show just your tracks.\nUsing satellite photos\nIf you don't have a GPS, don't worry. In some cities, we have satellite photos you can trace over, kindly supplied by Yahoo! (thanks!). Go out and note the street names, then come back and trace over the \n\nlines.\n\nIf you don't see the satellite imagery, click the options button and make sure 'Yahoo!' is selected. If you still don't see it, it's probably not available for your city, or you might need to zoom out a bit.\n\nOn this same options button you'll find a few other choices like an out-of-copyright map of the UK, and OpenTopoMap for the US. These are all specially selected because we're allowed to use them - don't copy from \n\nanyone else's maps or aerial photos. (Copyright law sucks.)\n\nSometimes satellite pics are a bit displaced from where the roads really are. If you find this, hold Space and drag the background until it lines up. Always trust GPS tracks over satellite pics.\n\nDrawing ways\nTo draw a road (or 'way') starting at a blank space on the map, just click there; then at each point on the road in turn. When you've finished, double-click or press Enter - then click somewhere else to \n\ndeselect the road.\n\nTo draw a way starting from another way, click that road to select it; its points will appear red. Hold Shift and click one of them to start a new way at that point. (If there's no red point at the junction, shift-click where \n\nyou want one!)\n\nClick 'Save' (bottom right) when you're done. Save often, in case the server has problems.\n\nDon't expect your changes to show instantly on the main map. It usually takes an hour or two, sometimes up to a week.\nMaking junctions\nIt's really important that, where two roads join, they share a point (or 'node'). Route-planners use this to know where to turn.\n\nPotlatch takes care of this as long as you are careful to click exactly on the way you're joining. Look for the helpful signs: the points light up blue, the pointer changes, and when you're done, the junction point \n\nhas a black outline.\nMoving and deleting\nThis works just as you'd expect it to. To delete a point, select it and press Delete. To delete a whole way, press Shift-Delete.\n\nTo move something, just drag it. (You'll have to click and hold for a short while before dragging a way, so you don't do it by accident.)\nMore advanced drawing\nIf two parts of a way have different names, you'll need to split them. Click the way; then click the point where it should be split, and click the scissors. (You can merge ways by \n\nShift-clicking, but don't merge two roads of different names or types.)\n\nRoundabouts are really hard to draw right. Don't worry - Potlatch can help. Just draw the loop roughly, making sure it joins back on itself at the end, then click this icon to 'tidy' it. (You can also use \n\nthis to straighten out roads.)\nPoints of interest\nThe first thing you learned was how to drag-and-drop a point of interest. You can also create one by double-clicking on the map: a green circle appears. But how to say whether it's a pub, a church or what? \n\nClick 'Tagging' above to find out!\n\nWhat type of road is it?\nOnce you've drawn a way, you should say what it is. Is it a major road, a footpath or a river? What's its name? Are there any special rules (e.g. \"no bicycles\")?\n\nIn OpenStreetMap, you record this using 'tags'. A tag has two parts, and you can have as many as you like. For example, you could add highway | trunk to say it's a major road; highway | residential for a \n\nroad on a housing estate; or highway | footway for a footpath. If bikes were banned, you could then add bicycle | no. Then to record its name, add name | Market Street.\n\nThe tags in Potlatch appear at the bottom of the screen - click an existing road, and you'll see what tags it has. Click the '+' sign (bottom right) to add a new tag. The 'x' by each tag deletes it.\n\nYou can tag whole ways; points in ways (maybe a gate or a traffic light); and points of interest.\nUsing preset tags\nTo get you started, Potlatch has ready-made presets containing the most popular tags.\n\nSelect a way, then click through the symbols until you find a suitable one. Then, choose the most appropriate option from the menu.\n\nThis will fill the tags in. Some will be left partly blank so you can type in (for example) the road name and number.\nOne-way roads\nYou might want to add a tag like oneway | yes - but how do you say which direction? There's an arrow in the bottom left that shows the way's direction, from start to end. Click it to \n\nreverse.\nChoosing your own tags\nOf course, you're not restricted to just the presets. By using the '+' button, you can use any tags at all.\n\nYou can see what tags other people use at OSMdoc, and there is a long list of popular tags on our wiki called Map Features. But these are only suggestions, not rules. You are free to invent your own tags or borrow from others.\n\nBecause OpenStreetMap data is used to make many different maps, each map will show (or 'render') its own choice of tags.\nRelations\nSometimes tags aren't enough, and you need to 'group' two or more ways. Maybe a turn is banned from one road into another, or 20 ways together make up a signed cycle route. You can do this with an \n\nadvanced feature called 'relations'. Find out more on the wiki.\n\nUndoing mistakes\nThis is the undo button (you can also press Z) - it will undo the last thing you did.\n\nYou can 'revert' to a previously saved version of a way or point. Select it, then click its ID (the number at the bottom left) - or press H (for 'history'). You'll see a list of everyone who's edited it, and when. Choose the one \n\nto go back to, and click Revert.\n\nIf you've accidentally deleted a way and saved it, press U (for 'undelete'). All the deleted ways will be shown. Choose the one you want; unlock it by clicking the padlock (by the ID); and save as usual.\n\nThink someone else has made a mistake? Send them a friendly message. Use the history option (H) to select their name, then click 'Mail'.\n\nUse the Inspector (in the 'Advanced' menu) for helpful information about the current way or point.\nFAQs\nHow do I see my waypoints?\nWaypoints only show up if you click 'edit' by the track name in 'GPS Traces'. The file has to have both waypoints and tracklog in it - the server rejects anything with waypoints alone.\n\nMore FAQs for Potlatch and OpenStreetMap.\n\n\n\nWorking faster\nThe further out you're zoomed, the more data Potlatch has to load. Zoom in before clicking 'Edit'.\n\nTurn off 'Use pen and hand pointers' (in the options window) for maximum speed.\n\nIf the server is running slowly, come back later. Check the wiki for known problems. Some times, like Sunday evenings, are always \n\nbusy.\n\nTell Potlatch to memorise your favourite sets of tags. Select a way or point with those tags, then press Ctrl, Shift and a number from 1 to 9. Then, to apply those tags again, just press Shift and that number. (They'll be \n\nremembered every time you use Potlatch on this computer.)\n\nTurn your GPS track into a way by finding it in the 'GPS Traces' list, clicking 'edit' by it, then tick the 'convert' box. It'll be locked (red) so won't save. Edit it first, then click the padlock (bottom left) to unlock when ready \n\nto save.\n\nWhat to click\nDrag the map to move around.\nDouble-click to create a new POI.\nSingle-click to start a new way.\nHold and drag a way or POI to move it.\nWhen drawing a way\nDouble-click or press Enter to finish drawing.\nClick another way to make a junction.\nShift-click the end of another way to merge.\nWhen a way is selected\nClick a point to select it.\nShift-click in the way to insert a new point.\nShift-click a point to start a new way from there.\nShift-click another way to merge.\n\nKeyboard shortcuts\nB Add background source tag\nC Close changeset\nG Show GPS tracks\nH Show history\nI Show inspector\nJ Join point to crossing ways\nK Lock/unlock current selection\nL Show current latitude/longitude\nM Maximise editing window\nP Create parallel way\nR Repeat tags\nS Save (unless editing live)\nT Tidy into straight line/circle\nU Undelete (show deleted ways)\nX Cut way in two\nZ Undo\n- Remove point from this way only\n+ Add new tag\n/ Select another way sharing this point\nDelete Delete point\n (+Shift) Delete entire way\nReturn Finish drawing line\nSpace Hold and drag background\nEsc Abort this edit; reload from server\n0 Remove all tags\n1-9 Select preset tags\n (+Shift) Select memorised tags\n (+S/Ctrl) Memorise tags\n§ or ` Cycle between tag groups\n\n" hint_drawmode: нажмите для добавления точки,\nдвойной щелчок или Enter\nчтобы закончить линию hint_loading: загрузка данных hint_overendpoint: над конечной точкой\nclick для соединения\nshift-click для слияния hint_overpoint: над точкой ($1)\nнажмите для соединения hint_pointselected: точка выбрана\n(нажмите с Shift на точку\nчтобы начать новую линию) hint_saving: сохранение данных hint_saving_loading: загрузка / сохранение данных login_pwd: "Пароль:" login_retry: Ваш логин с сайта не был распознан. Пожалуйста, попробуйте ещё раз. login_title: Не удаётся войти login_uid: "Имя пользователя:" mail: Письмо more: Ещё newchangeset: \nПожалуйста, повторите попытку. Potlatch начнёт новый пакет правок. nobackground: Без подложки norelations: Нет отношений в текущей области offset_broadcanal: Набережная широкого канала offset_choose: Выбор смещения (m) offset_dual: Шоссе с разделительной полосой (D2) offset_motorway: Автомагистраль (D3) offset_narrowcanal: Набережная узкого канала ok: OK openchangeset: Открытие пакета правок option_custompointers: Использовать курсоры пера и руки option_external: "Внешний запуск:" option_fadebackground: Светлый фон option_noname: Подсвечивать дороги без названий option_photo: "Фото KML:" option_thinareas: Использовать тонкие линии для зон option_thinlines: Использовать тонкие линии на всех масштабах option_tiger: Подсвечивать неизменённые TIGER option_warnings: Показывать всплывающие предупреждения point: Точка prompt_addtorelation: Добавить $1 в отношение prompt_changesetcomment: "Опишите ваши изменения:" prompt_closechangeset: Закрытие пакета правок $1 prompt_createparallel: Создание параллельной линии prompt_editlive: Правка вживую prompt_editsave: Правка с сохранением prompt_helpavailable: Вы новичок? Воспользуйтесь кнопкой «Справка». prompt_launch: Перейти по внешней ссылке prompt_revertversion: "Вернуться к ранее сохранённой версии:" prompt_savechanges: Сохранение изменений prompt_taggedpoints: Некоторые точки данной линии содержат метки. Действительно удалить? prompt_track: Преобразовать GPS-трек в линии prompt_welcome: Добро пожаловать в OpenStreetMap! retry: Повторить revert: Вернуть save: Сохранить tip_addrelation: Добавить отношение tip_addtag: Добавить новую метку tip_alert: Произошла ошибка — нажмите для получения подробностей tip_anticlockwise: Замкнутая линия против часовой стрелки — изменить на противоположное tip_clockwise: Замкнутая линия по часовой стрелке — изменить на противоположное tip_direction: Направление линии — изменить на противоположное tip_gps: Показать GPS-треки (G) tip_noundo: Нечего отменять tip_options: Задание настроек (выбор карты-подложки) tip_photo: Загрузка фотографий tip_presettype: Выберите, какой набор меток отображать в меню. tip_repeattag: Повторить метки с предыдущей выбранной линии (R) tip_revertversion: Выберите версию для восстановления tip_selectrelation: Добавить в выбранный маршрут tip_splitway: Разделить линию в текущей точке (X) tip_tidy: Убрать точки в линии (T) tip_undo: Отменить $1 (Z) uploading: Загрузка… way: Линия