+++ /dev/null
-require File.dirname(__FILE__) + '/../test_helper'
-
-class BoundingBoxTest < ActiveSupport::TestCase
- def setup
- @size_error_message = "The maximum bbox size is 0.25, and your request was too large. Either request a smaller area, or use planet.osm"
- @malformed_error_message = "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat"
- @lon_order_error_message = "The minimum longitude must be less than the maximum longitude, but it wasn't"
- @lat_order_error_message = "The minimum latitude must be less than the maximum latitude, but it wasn't"
- @bbox_out_of_limits_error_message = "The latitudes must be between -90.0 and 90.0, and longitudes between -180.0 and 180.0"
- @nil_error_message = "Should not contain nil"
-
- @bbox_from_nils = BoundingBox.new(nil, nil, nil, nil)
- @bbox_expand = BoundingBox.new(0,0,0,0)
- @bbox_expand_ten = BoundingBox.new(10,10,10,10)
- @bbox_expand_minus_two = BoundingBox.new(-2,-2,-2,-2)
- @bbox_from_string = BoundingBox.from_s("1,2,3,4")
- @min_lon = 1.0
- @min_lat = 2.0
- @max_lon = 3.0
- @max_lat = 4.0
-
- @bad_positive_boundary_bbox = %w{ 181,91,0,0 0,0,181,91 }
- @bad_negative_boundary_bbox = %w{ -181,-91,0,0 0,0,-181,-91 }
- @bad_big_bbox = %w{ -0.1,-0.1,1.1,1.1 10,10,11,11 }
- @bad_malformed_bbox = %w{ -0.1 hello 10N2W10.1N2.1W }
- @bad_lat_mixed_bbox = %w{ 0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33 }
- @bad_lon_mixed_bbox = %w{ 80,-0.1,70,0.1 54.34,0.24,54.33,0.25 }
- @bad_limit_bbox = %w{ -180.1,-90,180,90 -180,-90.1,180,90 -180,-90,180.1,90 -180,-90,180,90.1}
- @good_bbox = %w{ -0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0 -0.1,%20-0.1,%200.1,%200.1
- -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1}
-
- @expand_min_lon_array = %w{ 2,10,10,10 1,10,10,10 0,10,10,10 -1,10,10,10 -2,10,10,10 -8,10,10,10 }
- @expand_min_lat_array = %w{ 10,2,10,10 10,1,10,10 10,0,10,10 10,-1,10,10 10,-2,10,10 10,-8,10,10 }
- @expand_max_lon_array = %w{ -2,-2,-1,-2 -2,-2,0,-2 -2,-2,1,-2 -2,-2,2,-2 }
- @expand_max_lat_array = %w{ -2,-2,-2,-1 -2,-2,-2,0 -2,-2,-2,1 -2,-2,-2,2 }
- @expand_min_lon_margin_response = [[2,10,10,10], [-7,10,10,10], [-7,10,10,10], [-7,10,10,10], [-7,10,10,10], [-25,10,10,10]]
- @expand_min_lat_margin_response = [[10,2,10,10], [10,-7,10,10], [10,-7,10,10], [10,-7,10,10], [10,-7,10,10], [10,-25,10,10]]
- @expand_max_lon_margin_response = [[-2,-2,-1,-2], [-2,-2,1,-2], [-2,-2,1,-2], [-2,-2,5,-2]]
- @expand_max_lat_margin_response = [[-2,-2,-2,-1], [-2,-2,-2,1], [-2,-2,-2,1], [-2,-2,-2,5]]
- end
-
- def test_good_bbox_from_string
- @good_bbox.each do |string|
- bbox = BoundingBox.from_s(string)
- array = string.split(',').collect {|s| s.to_f}
- check_bbox(bbox, array)
- end
- end
-
- def test_bbox_from_s_malformed
- @bad_malformed_bbox.each do |bbox_string|
- bbox = BoundingBox.from_s(bbox_string)
- assert_nil bbox
- end
- end
-
- def test_good_bbox_from_params
- @good_bbox.each do |string|
- bbox = BoundingBox.from_bbox_params({:bbox => string})
- array = string.split(',').collect {|s| s.to_f}
- check_bbox(bbox, array)
- end
- end
-
- def test_good_bbox_from_lon_lat_params
- @good_bbox.each do |string|
- array = string.split(',')
- bbox = BoundingBox.from_lon_lat_params({:minlon => array[0], :minlat => array[1], :maxlon => array[2], :maxlat => array[3]})
- check_bbox(bbox, array.collect {|s| s.to_f})
- end
- end
-
- def test_bbox_from_params_malformed
- @bad_malformed_bbox.each do |bbox_string|
- exception = assert_raise(OSM::APIBadUserInput) {BoundingBox.from_bbox_params({:bbox => bbox_string})}
- assert_equal(@malformed_error_message, exception.message)
- end
- end
-
- def test_good_bbox_from_new
- @good_bbox.each do |string|
- array = string.split(',')
- bbox = BoundingBox.new(array[0], array[1], array[2], array[3])
- check_bbox(bbox, array.collect {|s| s.to_f})
- end
- end
-
- def test_creation_from_new_with_nils
- check_bbox(@bbox_from_nils, [nil, nil, nil, nil])
- end
-
- def test_expand_min_lon_boundary
- @bbox_expand.expand!(BoundingBox.new(-1810000000,0,0,0))
- check_expand(@bbox_expand, "-1800000000,0,0,0")
- end
-
- def test_expand_min_lat_boundary
- @bbox_expand.expand!(BoundingBox.new(0,-910000000,0,0))
- check_expand(@bbox_expand, "0,-900000000,0,0")
- end
-
- def test_expand_max_lon_boundary
- @bbox_expand.expand!(BoundingBox.new(0,0,1810000000,0))
- check_expand(@bbox_expand, "0,0,1800000000,0")
- end
-
- def test_expand_max_lat_boundary
- @bbox_expand.expand!(BoundingBox.new(0,0,0,910000000))
- check_expand(@bbox_expand, "0,0,0,900000000")
- end
-
- def test_expand_min_lon_without_margin
- @expand_min_lon_array.each {|array_string| check_expand(@bbox_expand_ten, array_string)}
- end
-
- def test_expand_min_lon_with_margin
- @expand_min_lon_array.each_with_index do |array_string, index|
- check_expand(@bbox_expand_ten, array_string, 1, @expand_min_lon_margin_response[index])
- end
- end
-
- def test_expand_min_lat_without_margin
- @expand_min_lat_array.each {|array_string| check_expand(@bbox_expand_ten, array_string)}
- end
-
- def test_expand_min_lat_with_margin
- @expand_min_lat_array.each_with_index do |array_string, index|
- check_expand(@bbox_expand_ten, array_string, 1, @expand_min_lat_margin_response[index])
- end
- end
-
- def test_expand_max_lon_without_margin
- @expand_max_lon_array.each {|array_string| check_expand(@bbox_expand_minus_two, array_string)}
- end
-
- def test_expand_max_lon_with_margin
- @expand_max_lon_array.each_with_index do |array_string, index|
- check_expand(@bbox_expand_minus_two, array_string, 1, @expand_max_lon_margin_response[index])
- end
- end
-
- def test_expand_max_lat_without_margin
- @expand_max_lat_array.each {|array_string| check_expand(@bbox_expand_minus_two, array_string)}
- end
-
- def test_expand_max_lat_with_margin
- bbox = @bbox_expand
- @expand_max_lat_array.each_with_index do |array_string, index|
- check_expand(@bbox_expand_minus_two, array_string, 1, @expand_max_lat_margin_response[index])
- end
- end
-
- def test_good_bbox_boundaries
- @good_bbox.each do |bbox_string|
- assert_nothing_raised(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
- end
- end
-
- def test_from_params_with_positive_out_of_boundary
- @bad_positive_boundary_bbox.each do |bbox_string|
- bbox = BoundingBox.from_bbox_params({:bbox => bbox_string})
- array = bbox.to_a
- assert_equal 180, [array[0], array[2]].max
- assert_equal 90, [array[1], array[3]].max
- end
- end
-
- def test_from_params_with_negative_out_of_boundary
- @bad_negative_boundary_bbox.each do |bbox_string|
- bbox = BoundingBox.from_bbox_params({:bbox => bbox_string})
- array = bbox.to_a
- assert_equal -180, [array[0], array[2]].min
- assert_equal -90, [array[1], array[3]].min
- end
- end
-
- def test_boundaries_mixed_lon
- @bad_lon_mixed_bbox.each do |bbox_string|
- exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
- assert_equal(@lon_order_error_message, exception.message)
- end
- end
-
- def test_boundaries_mixed_lat
- @bad_lat_mixed_bbox.each do |bbox_string|
- exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
- assert_equal(@lat_order_error_message, exception.message)
- end
- end
-
- def test_boundaries_out_of_limits
- @bad_limit_bbox.each do |bbox_string|
- exception = assert_raise(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_boundaries}
- assert_equal(@bbox_out_of_limits_error_message, exception.message)
- end
- end
-
- def test_good_bbox_size
- @good_bbox.each do |bbox_string|
- assert_nothing_raised(OSM::APIBadBoundingBox) {BoundingBox.from_s(bbox_string).check_size}
- end
- end
-
- def test_size_to_big
- @bad_big_bbox.each do |bbox_string|
- bbox = nil
- assert_nothing_raised(OSM::APIBadBoundingBox) {bbox = BoundingBox.from_bbox_params({:bbox => bbox_string}).check_boundaries}
- exception = assert_raise(OSM::APIBadBoundingBox) {bbox.check_size}
- assert_equal(@size_error_message, exception.message)
- end
- end
-
- def test_bbox_area
- @good_bbox.each do |string|
- bbox = BoundingBox.from_s(string)
- array = string.split(',')
- assert_equal ((array[2].to_f - array[0].to_f) * (array[3].to_f - array[1].to_f)), bbox.area
- end
- end
-
- def test_complete
- assert !@bbox_from_nils.complete?, "should contain a nil"
- assert @bbox_from_string.complete?, "should not contain a nil"
- end
-
- def test_centre_lon
- @good_bbox.each do |bbox_string|
- array = bbox_string.split(',')
- assert_equal ((array[0].to_f + array[2].to_f) / 2.0), BoundingBox.from_s(bbox_string).centre_lon
- end
- end
-
- def test_centre_lat
- @good_bbox.each do |bbox_string|
- array = bbox_string.split(',')
- assert_equal ((array[1].to_f + array[3].to_f) / 2.0), BoundingBox.from_s(bbox_string).centre_lat
- end
- end
-
- def test_width
- @good_bbox.each do |bbox_string|
- array = bbox_string.split(',')
- assert_equal (array[2].to_f - array[0].to_f), BoundingBox.from_s(bbox_string).width
- end
- end
-
- def test_height
- @good_bbox.each do |bbox_string|
- array = bbox_string.split(',')
- assert_equal (array[3].to_f - array[1].to_f), BoundingBox.from_s(bbox_string).height
- end
- end
-
- def test_slippy_width
- assert_in_delta 5.68888888888889, @bbox_from_string.slippy_width(2), 0.000000000000001
- end
-
- def test_slippy_height
- assert_in_delta 5.69698684268433, @bbox_from_string.slippy_height(2), 0.000000000000001
- end
-
- def test_add_bounds_to_no_underscore
- bounds = @bbox_from_string.add_bounds_to({})
- assert_equal 4, bounds.size
- assert_equal @min_lon.to_s, bounds['minlon']
- assert_equal @min_lat.to_s, bounds['minlat']
- assert_equal @max_lon.to_s, bounds['maxlon']
- assert_equal @max_lat.to_s, bounds['maxlat']
- end
-
- def test_add_bounds_to_with_underscore
- bounds = @bbox_from_string.add_bounds_to({}, '_')
- assert_equal 4, bounds.size
- assert_equal @min_lon.to_s, bounds['min_lon']
- assert_equal @min_lat.to_s, bounds['min_lat']
- assert_equal @max_lon.to_s, bounds['max_lon']
- assert_equal @max_lat.to_s, bounds['max_lat']
- end
-
- def test_to_scaled
- bbox = @bbox_from_string.to_scaled
- assert_equal @min_lon * GeoRecord::SCALE, bbox.min_lon
- assert_equal @min_lat * GeoRecord::SCALE, bbox.min_lat
- assert_equal @max_lon * GeoRecord::SCALE, bbox.max_lon
- assert_equal @max_lat * GeoRecord::SCALE, bbox.max_lat
- end
-
- def test_to_unscaled
- scale = GeoRecord::SCALE
- bbox = BoundingBox.new(1.0 * scale, 2.0 * scale, 3.0 * scale, 4.0 * scale).to_unscaled
- check_bbox(bbox, [@min_lon, @min_lat, @max_lon, @max_lat])
- end
-
- def test_to_a
- assert_equal [1.0,2.0,3.0,4.0], @bbox_from_string.to_a
- end
-
- def test_to_string
- assert_equal "#{@min_lon},#{@min_lat},#{@max_lon},#{@max_lat}", @bbox_from_string.to_s
- end
-
- private
- def check_expand(bbox, array_string, margin = 0, result = nil)
- array = array_string.split(',').collect {|s| s.to_f}
- result = array unless result
- bbox.expand!(BoundingBox.new(array[0], array[1], array[2], array[3]), margin)
- check_bbox(bbox, result)
- end
-
- def check_bbox(bbox, result)
- assert_equal result[0], bbox.min_lon, 'min_lon'
- assert_equal result[1], bbox.min_lat, 'min_lat'
- assert_equal result[2], bbox.max_lon, 'max_lon'
- assert_equal result[3], bbox.max_lat, 'max_lat'
- end
-end