class ApiController < ApplicationController
+ skip_before_action :verify_authenticity_token
- session :off
- before_filter :check_read_availability, :except => [:capabilities]
- after_filter :compress_output
+ private
- # Help methods for checking boundary sanity and area size
- include MapBoundary
+ def authorize(realm = "Web Password", errormessage = "Couldn't authenticate you")
+ # make the current_user object from any auth sources we have
+ setup_user_auth
- #COUNT is the number of map requests to allow before exiting and starting a new process
- @@count = COUNT
-
- # The maximum area you're allowed to request, in square degrees
- MAX_REQUEST_AREA = 0.25
-
- # Number of GPS trace/trackpoints returned per-page
- TRACEPOINTS_PER_PAGE = 5000
-
-
- def trackpoints
- @@count+=1
- #retrieve the page number
- page = params['page'].to_i
- unless page
- page = 0;
- end
-
- unless page >= 0
- report_error("Page number must be greater than or equal to 0")
- return
+ # handle authenticate pass/fail
+ unless current_user
+ # no auth, the user does not exist or the password was wrong
+ response.headers["WWW-Authenticate"] = "Basic realm=\"#{realm}\""
+ render :plain => errormessage, :status => :unauthorized
+ return false
end
-
- offset = page * TRACEPOINTS_PER_PAGE
-
- # Figure out the bbox
- bbox = params['bbox']
- unless bbox and bbox.count(',') == 3
- report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
- return
- end
-
- bbox = bbox.split(',')
- min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
- # check boundary is sane and area within defined
- # see /config/application.yml
- begin
- check_boundaries(min_lon, min_lat, max_lon, max_lat)
- rescue Exception => err
- report_error(err.message)
- return
- end
-
- # get all the points
- points = Tracepoint.find_by_area(min_lat, min_lon, max_lat, max_lon, :offset => offset, :limit => TRACEPOINTS_PER_PAGE, :order => "timestamp DESC" )
-
- doc = XML::Document.new
- doc.encoding = 'UTF-8'
- root = XML::Node.new 'gpx'
- root['version'] = '1.0'
- root['creator'] = 'OpenStreetMap.org'
- root['xmlns'] = "http://www.topografix.com/GPX/1/0/"
-
- doc.root = root
-
- track = XML::Node.new 'trk'
- doc.root << track
-
- trkseg = XML::Node.new 'trkseg'
- track << trkseg
-
- points.each do |point|
- trkseg << point.to_xml_node()
- end
-
- #exit when we have too many requests
- if @@count > MAX_COUNT
- render :text => doc.to_s, :content_type => "text/xml"
- @@count = COUNT
- exit!
- end
-
- response.headers["Content-Disposition"] = "attachment; filename=\"map.osm\""
-
- render :text => doc.to_s, :content_type => "text/xml"
end
- def map
- GC.start
- @@count+=1
- # Figure out the bbox
- bbox = params['bbox']
-
- unless bbox and bbox.count(',') == 3
- # alternatively: report_error(TEXT['boundary_parameter_required']
- report_error("The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat")
- return
- end
-
- bbox = bbox.split(',')
-
- min_lon, min_lat, max_lon, max_lat = sanitise_boundaries(bbox)
-
- # check boundary is sane and area within defined
- # see /config/application.yml
- begin
- check_boundaries(min_lon, min_lat, max_lon, max_lat)
- rescue Exception => err
- report_error(err.message)
- return
- end
-
- @nodes = Node.find_by_area(min_lat, min_lon, max_lat, max_lon, :conditions => "visible = 1", :limit => APP_CONFIG['max_number_of_nodes']+1)
- # get all the nodes, by tag not yet working, waiting for change from NickB
- # need to be @nodes (instance var) so tests in /spec can be performed
- #@nodes = Node.search(bbox, params[:tag])
-
- node_ids = @nodes.collect(&:id)
- if node_ids.length > APP_CONFIG['max_number_of_nodes']
- report_error("You requested too many nodes (limit is 50,000). Either request a smaller area, or use planet.osm")
- return
- end
- if node_ids.length == 0
- render :text => "<osm version='0.5'></osm>", :content_type => "text/xml"
- return
- end
-
- doc = OSM::API.new.get_xml_doc
-
- # add bounds
- bounds = XML::Node.new 'bounds'
- bounds['minlat'] = min_lat.to_s
- bounds['minlon'] = min_lon.to_s
- bounds['maxlat'] = max_lat.to_s
- bounds['maxlon'] = max_lon.to_s
- doc.root << bounds
-
- # get ways
- # find which ways are needed
- ways = Array.new
- if node_ids.length > 0
- way_nodes = WayNode.find_all_by_node_id(node_ids)
- way_ids = way_nodes.collect { |way_node| way_node.id[0] }
- ways = Way.find(way_ids)
-
- list_of_way_nodes = ways.collect { |way|
- way.way_nodes.collect { |way_node| way_node.node_id }
- }
- list_of_way_nodes.flatten!
-
+ def current_ability
+ # Use capabilities from the oauth token if it exists and is a valid access token
+ if Authenticator.new(self, [:token]).allow?
+ ApiAbility.new(nil).merge(ApiCapability.new(current_token))
else
- list_of_way_nodes = Array.new
- end
-
- # - [0] in case some thing links to node 0 which doesn't exist. Shouldn't actually ever happen but it does. FIXME: file a ticket for this
- nodes_to_fetch = (list_of_way_nodes.uniq - node_ids) - [0]
-
- if nodes_to_fetch.length > 0
- @nodes += Node.find(nodes_to_fetch)
- end
-
- visible_nodes = {}
- user_display_name_cache = {}
-
- @nodes.each do |node|
- if node.visible?
- doc.root << node.to_xml_node(user_display_name_cache)
- visible_nodes[node.id] = node
- end
- end
-
- way_ids = Array.new
- ways.each do |way|
- if way.visible?
- doc.root << way.to_xml_node(visible_nodes, user_display_name_cache)
- way_ids << way.id
- end
- end
-
- relations = visible_nodes.values.collect { |node| node.containing_relations.visible }.flatten +
- way_ids.collect { |id| Way.find(id).containing_relations.visible }.flatten
-
- # we do not normally return the "other" partners referenced by an relation,
- # e.g. if we return a way A that is referenced by relation X, and there's
- # another way B also referenced, that is not returned. But we do make
- # an exception for cases where an relation references another *relation*;
- # in that case we return that as well (but we don't go recursive here)
- relations += relations.collect { |relation| relation.containing_relations.visible }.flatten
-
- # this "uniq" may be slightly inefficient; it may be better to first collect and output
- # all node-related relations, then find the *not yet covered* way-related ones etc.
- relations.uniq.each do |relation|
- doc.root << relation.to_xml_node(user_display_name_cache)
- end
-
- response.headers["Content-Disposition"] = "attachment; filename=\"map.osm\""
-
- render :text => doc.to_s, :content_type => "text/xml"
-
- #exit when we have too many requests
- if @@count > MAX_COUNT
- @@count = COUNT
-
- exit!
+ ApiAbility.new(current_user)
end
end
- def changes
- zoom = (params[:zoom] || '12').to_i
-
- if params.include?(:start) and params.include?(:end)
- starttime = Time.parse(params[:start])
- endtime = Time.parse(params[:end])
+ def deny_access(_exception)
+ if current_token
+ set_locale
+ report_error t("oauth.permissions.missing"), :forbidden
+ elsif current_user
+ head :forbidden
else
- hours = (params[:hours] || '1').to_i.hours
- endtime = Time.now
- starttime = endtime - hours
+ realm = "Web Password"
+ errormessage = "Couldn't authenticate you"
+ response.headers["WWW-Authenticate"] = "Basic realm=\"#{realm}\""
+ render :plain => errormessage, :status => :unauthorized
end
+ end
- if zoom >= 1 and zoom <= 16 and
- endtime >= starttime and endtime - starttime <= 24.hours
- mask = (1 << zoom) - 1
-
- tiles = Node.count(:conditions => ["timestamp BETWEEN ? AND ?", starttime, endtime],
- :group => "maptile_for_point(latitude, longitude, #{zoom})")
-
- doc = OSM::API.new.get_xml_doc
- changes = XML::Node.new 'changes'
- changes["starttime"] = starttime.xmlschema
- changes["endtime"] = endtime.xmlschema
-
- tiles.each do |tile, count|
- x = (tile.to_i >> zoom) & mask
- y = tile.to_i & mask
-
- t = XML::Node.new 'tile'
- t["x"] = x.to_s
- t["y"] = y.to_s
- t["z"] = zoom.to_s
- t["changes"] = count.to_s
+ def gpx_status
+ status = database_status
+ status = "offline" if status == "online" && Settings.status == "gpx_offline"
+ status
+ end
- changes << t
+ ##
+ # sets up the current_user for use by other methods. this is mostly called
+ # from the authorize method, but can be called elsewhere if authorisation
+ # is optional.
+ def setup_user_auth
+ # try and setup using OAuth
+ unless Authenticator.new(self, [:token]).allow?
+ username, passwd = get_auth_data # parse from headers
+ # authenticate per-scheme
+ self.current_user = if username.nil?
+ nil # no authentication provided - perhaps first connect (client should retry after 401)
+ elsif username == "token"
+ User.authenticate(:token => passwd) # preferred - random token for user from db, passed in basic auth
+ else
+ User.authenticate(:username => username, :password => passwd) # basic auth
+ end
+ end
+
+ # have we identified the user?
+ if current_user
+ # check if the user has been banned
+ user_block = current_user.blocks.active.take
+ unless user_block.nil?
+ set_locale
+ if user_block.zero_hour?
+ report_error t("application.setup_user_auth.blocked_zero_hour"), :forbidden
+ else
+ report_error t("application.setup_user_auth.blocked"), :forbidden
+ end
end
- doc.root << changes
-
- render :text => doc.to_s, :content_type => "text/xml"
- else
- render :nothing => true, :status => :bad_request
+ # if the user hasn't seen the contributor terms then don't
+ # allow editing - they have to go to the web site and see
+ # (but can decline) the CTs to continue.
+ if !current_user.terms_seen && flash[:skip_terms].nil?
+ set_locale
+ report_error t("application.setup_user_auth.need_to_see_terms"), :forbidden
+ end
end
end
-
- def capabilities
- doc = OSM::API.new.get_xml_doc
-
- api = XML::Node.new 'api'
- version = XML::Node.new 'version'
- version['minimum'] = '0.5';
- version['maximum'] = '0.5';
- api << version
- area = XML::Node.new 'area'
- area['maximum'] = MAX_REQUEST_AREA.to_s;
- api << area
-
- doc.root << api
-
- render :text => doc.to_s, :content_type => "text/xml"
- end
end
projects / rails.git / blobdiff