X-Git-Url: https://git.openstreetmap.org/rails.git/blobdiff_plain/dc2a95903722644f6109244cec9a2d1e195fef0e..98a76339b84450999b0cadeacf528a78cff09cae:/test/functional/changeset_controller_test.rb
diff --git a/test/functional/changeset_controller_test.rb b/test/functional/changeset_controller_test.rb
index 946d139d8..91b89cdba 100644
--- a/test/functional/changeset_controller_test.rb
+++ b/test/functional/changeset_controller_test.rb
@@ -1,35 +1,24 @@
require File.dirname(__FILE__) + '/../test_helper'
require 'changeset_controller'
-# Re-raise errors caught by the controller.
-class ChangesetController; def rescue_action(e) raise e end; end
-
- class ChangesetControllerTest < Test::Unit::TestCase
+class ChangesetControllerTest < ActionController::TestCase
api_fixtures
-
-
-
- def setup
- @controller = ChangesetController.new
- @request = ActionController::TestRequest.new
- @response = ActionController::TestResponse.new
- end
-
- def basic_authorization(user, pass)
- @request.env["HTTP_AUTHORIZATION"] = "Basic %s" % Base64.encode64("#{user}:#{pass}")
- end
- def content(c)
- @request.env["RAW_POST_DATA"] = c.to_s
- end
-
# -----------------------
# Test simple changeset creation
# -----------------------
def test_create
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:normal_user).email, "test"
+ # Create the first user's changeset
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_require_public_data
+
+ basic_authorization users(:public_user).email, "test"
# Create the first user's changeset
content "" +
"" +
@@ -37,42 +26,173 @@ class ChangesetController; def rescue_action(e) raise e end; end
put :create
assert_response :success, "Creation of changeset did not return sucess status"
- newid = @response.body
+ newid = @response.body.to_i
+
+ # check end time, should be an hour ahead of creation time
+ cs = Changeset.find(newid)
+ duration = cs.closed_at - cs.created_at
+ # the difference can either be a rational, or a floating point number
+ # of seconds, depending on the code path taken :-(
+ if duration.class == Rational
+ assert_equal Rational(1,24), duration , "initial idle timeout should be an hour (#{cs.created_at} -> #{cs.closed_at})"
+ else
+ # must be number of seconds...
+ assert_equal 3600, duration.round, "initial idle timeout should be an hour (#{cs.created_at} -> #{cs.closed_at})"
+ end
end
def test_create_invalid
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:normal_user).email, "test"
+ content ""
+ put :create
+ assert_require_public_data
+
+ ## Try the public user
+ basic_authorization users(:public_user).email, "test"
content ""
put :create
assert_response :bad_request, "creating a invalid changeset should fail"
end
+ def test_create_invalid_no_content
+ ## First check with no auth
+ put :create
+ assert_response :unauthorized, "shouldn't be able to create a changeset with no auth"
+
+ ## Now try to with the non-public user
+ basic_authorization users(:normal_user).email, "test"
+ put :create
+ assert_require_public_data
+
+ ## Try the inactive user
+ basic_authorization users(:inactive_user).email, "test"
+ put :create
+ assert_inactive_user
+
+ ## Now try to use the public user
+ basic_authorization users(:public_user).email, "test"
+ put :create
+ assert_response :bad_request, "creating a changeset with no content should fail"
+ end
+
+ def test_create_wrong_method
+ basic_authorization users(:public_user).email, "test"
+ get :create
+ assert_response :method_not_allowed
+ post :create
+ assert_response :method_not_allowed
+ end
+
+ ##
+ # check that the changeset can be read and returns the correct
+ # document structure.
def test_read
+ changeset_id = changesets(:normal_user_first_change).id
+ get :read, :id => changeset_id
+ assert_response :success, "cannot get first changeset"
+ assert_select "osm[version=#{API_VERSION}][generator=\"OpenStreetMap server\"]", 1
+ assert_select "osm>changeset[id=#{changeset_id}]", 1
+ end
+
+ ##
+ # check that a changeset that doesn't exist returns an appropriate message
+ def test_read_not_found
+ [0, -32, 233455644, "afg", "213"].each do |id|
+ get :read, :id => id
+ assert_response :not_found, "should get a not found"
+ end
end
+ ##
+ # test that the user who opened a change can close it
def test_close
+ ## Try without authentication
+ put :close, :id => changesets(:public_user_first_change).id
+ assert_response :unauthorized
+
+
+ ## Try using the non-public user
+ basic_authorization users(:normal_user).email, "test"
+ put :close, :id => changesets(:normal_user_first_change).id
+ assert_require_public_data
+
+
+ ## The try with the public user
+ basic_authorization users(:public_user).email, "test"
+
+ cs_id = changesets(:public_user_first_change).id
+ put :close, :id => cs_id
+ assert_response :success
+
+ # test that it really is closed now
+ cs = Changeset.find(cs_id)
+ assert(!cs.is_open?,
+ "changeset should be closed now (#{cs.closed_at} > #{Time.now}.")
+ end
+
+ ##
+ # test that a different user can't close another user's changeset
+ def test_close_invalid
+ basic_authorization users(:public_user).email, "test"
+
+ put :close, :id => changesets(:normal_user_first_change).id
+ assert_response :conflict
+ assert_equal "The user doesn't own that changeset", @response.body
+ end
+
+ ##
+ # test that you can't close using another method
+ def test_close_method_invalid
+ basic_authorization users(:public_user).email, "test"
+
+ cs_id = changesets(:public_user_first_change).id
+ get :close, :id => cs_id
+ assert_response :method_not_allowed
+
+ post :close, :id => cs_id
+ assert_response :method_not_allowed
+ end
+
+ ##
+ # check that you can't close a changeset that isn't found
+ def test_close_not_found
+ cs_ids = [0, -132, "123"]
+
+ # First try to do it with no auth
+ cs_ids.each do |id|
+ put :close, :id => id
+ assert_response :unauthorized, "Shouldn't be able close the non-existant changeset #{id}, when not authorized"
+ end
+ # Now try with auth
+ basic_authorization users(:public_user).email, "test"
+ cs_ids.each do |id|
+ put :close, :id => id
+ assert_response :not_found, "The changeset #{id} doesn't exist, so can't be closed"
+ end
end
##
# upload something simple, but valid and check that it can
- # be read back ok.
+ # be read back ok
+ # Also try without auth and another user.
def test_upload_simple_valid
- basic_authorization "test@openstreetmap.org", "test"
+ ## Try with no auth
+ changeset_id = changesets(:public_user_first_change).id
# simple diff to change a node, way and relation by removing
# their tags
diff = <
-
-
+
+
-
+
@@ -83,7 +203,71 @@ EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => changeset_id
+ assert_response :unauthorized,
+ "shouldnn't be able to upload a simple valid diff to changeset: #{@response.body}"
+
+
+
+ ## Now try with a private user
+ basic_authorization users(:normal_user).email, "test"
+ changeset_id = changesets(:normal_user_first_change).id
+
+ # simple diff to change a node, way and relation by removing
+ # their tags
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :forbidden,
+ "can't upload a simple valid diff to changeset: #{@response.body}"
+
+
+
+ ## Now try with the public user
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ # simple diff to change a node, way and relation by removing
+ # their tags
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
assert_response :success,
"can't upload a simple valid diff to changeset: #{@response.body}"
@@ -96,22 +280,23 @@ EOF
##
# upload something which creates new objects using placeholders
def test_upload_create_valid
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
# simple diff to create a node way and relation using placeholders
diff = <
-
+
-
+
-
+
@@ -122,31 +307,31 @@ EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :success,
"can't upload a simple valid creation to changeset: #{@response.body}"
# check the returned payload
- assert_select "osm[version=#{API_VERSION}][generator=\"OpenStreetMap server\"]", 1
- assert_select "osm>node", 1
- assert_select "osm>way", 1
- assert_select "osm>relation", 1
+ assert_select "diffResult[version=#{API_VERSION}][generator=\"OpenStreetMap server\"]", 1
+ assert_select "diffResult>node", 1
+ assert_select "diffresult>way", 1
+ assert_select "diffResult>relation", 1
# inspect the response to find out what the new element IDs are
doc = XML::Parser.string(@response.body).parse
- new_node_id = doc.find("//osm/node").first["new_id"].to_i
- new_way_id = doc.find("//osm/way").first["new_id"].to_i
- new_rel_id = doc.find("//osm/relation").first["new_id"].to_i
+ new_node_id = doc.find("//diffResult/node").first["new_id"].to_i
+ new_way_id = doc.find("//diffResult/way").first["new_id"].to_i
+ new_rel_id = doc.find("//diffResult/relation").first["new_id"].to_i
# check the old IDs are all present and negative one
- assert_equal -1, doc.find("//osm/node").first["old_id"].to_i
- assert_equal -1, doc.find("//osm/way").first["old_id"].to_i
- assert_equal -1, doc.find("//osm/relation").first["old_id"].to_i
+ assert_equal -1, doc.find("//diffResult/node").first["old_id"].to_i
+ assert_equal -1, doc.find("//diffResult/way").first["old_id"].to_i
+ assert_equal -1, doc.find("//diffResult/relation").first["old_id"].to_i
# check the versions are present and equal one
- assert_equal 1, doc.find("//osm/node").first["new_version"].to_i
- assert_equal 1, doc.find("//osm/way").first["new_version"].to_i
- assert_equal 1, doc.find("//osm/relation").first["new_version"].to_i
+ assert_equal 1, doc.find("//diffResult/node").first["new_version"].to_i
+ assert_equal 1, doc.find("//diffResult/way").first["new_version"].to_i
+ assert_equal 1, doc.find("//diffResult/relation").first["new_version"].to_i
# check that the changes made it into the database
assert_equal 2, Node.find(new_node_id).tags.size, "new node should have two tags"
@@ -158,7 +343,7 @@ EOF
# test a complex delete where we delete elements which rely on eachother
# in the same transaction.
def test_upload_delete
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).display_name, "test"
diff = XML::Document.new
diff.root = XML::Node.new "osmChange"
@@ -169,12 +354,25 @@ EOF
delete << current_ways(:used_way).to_xml_node
delete << current_nodes(:node_used_by_relationship).to_xml_node
+ # update the changeset to one that this user owns
+ changeset_id = changesets(:public_user_first_change).id
+ ["node", "way", "relation"].each do |type|
+ delete.find("//osmChange/delete/#{type}").each do |n|
+ n['changeset'] = changeset_id.to_s
+ end
+ end
+
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => changeset_id
assert_response :success,
"can't upload a deletion diff to changeset: #{@response.body}"
+ # check the response is well-formed
+ assert_select "diffResult>node", 1
+ assert_select "diffResult>way", 1
+ assert_select "diffResult>relation", 2
+
# check that everything was deleted
assert_equal false, Node.find(current_nodes(:node_used_by_relationship).id).visible
assert_equal false, Way.find(current_ways(:used_way).id).visible
@@ -182,25 +380,65 @@ EOF
assert_equal false, Relation.find(current_relations(:used_relation).id).visible
end
+ ##
+ # test uploading a delete with no lat/lon, as they are optional in
+ # the osmChange spec.
+ def test_upload_nolatlon_delete
+ basic_authorization users(:public_user).display_name, "test"
+
+ node = current_nodes(:public_visible_node)
+ cs = changesets(:public_user_first_change)
+ diff = ""
+
+ # upload it
+ content diff
+ post :upload, :id => cs.id
+ assert_response :success,
+ "can't upload a deletion diff to changeset: #{@response.body}"
+
+ # check the response is well-formed
+ assert_select "diffResult>node", 1
+
+ # check that everything was deleted
+ assert_equal false, Node.find(node.id).visible
+ end
+
+ def test_repeated_changeset_create
+ 30.times do
+ basic_authorization users(:public_user).email, "test"
+
+ # create a temporary changeset
+ content "" +
+ "" +
+ ""
+ assert_difference('Changeset.count', 1) do
+ put :create
+ end
+ assert_response :success
+ changeset_id = @response.body.to_i
+ end
+ end
+
##
# test that deleting stuff in a transaction doesn't bypass the checks
# to ensure that used elements are not deleted.
def test_upload_delete_invalid
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
diff = XML::Document.new
diff.root = XML::Node.new "osmChange"
delete = XML::Node.new "delete"
diff.root << delete
- delete << current_relations(:visible_relation).to_xml_node
+ delete << current_relations(:public_visible_relation).to_xml_node
delete << current_ways(:used_way).to_xml_node
delete << current_nodes(:node_used_by_relationship).to_xml_node
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => 2
assert_response :precondition_failed,
"shouldn't be able to upload a invalid deletion diff: #{@response.body}"
+ assert_equal "Precondition failed: Way 3 still used by relation 1.", @response.body
# check that nothing was, in fact, deleted
assert_equal true, Node.find(current_nodes(:node_used_by_relationship).id).visible
@@ -212,23 +450,24 @@ EOF
# upload something which creates new objects and inserts them into
# existing containers using placeholders.
def test_upload_complex
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
# simple diff to create a node way and relation using placeholders
diff = <
-
+
-
+
-
+
@@ -239,19 +478,19 @@ EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :success,
"can't upload a complex diff to changeset: #{@response.body}"
# check the returned payload
- assert_select "osm[version=#{API_VERSION}][generator=\"OpenStreetMap server\"]", 1
- assert_select "osm>node", 1
- assert_select "osm>way", 1
- assert_select "osm>relation", 1
+ assert_select "diffResult[version=#{API_VERSION}][generator=\"#{GENERATOR}\"]", 1
+ assert_select "diffResult>node", 1
+ assert_select "diffResult>way", 1
+ assert_select "diffResult>relation", 1
# inspect the response to find out what the new element IDs are
doc = XML::Parser.string(@response.body).parse
- new_node_id = doc.find("//osm/node").first["new_id"].to_i
+ new_node_id = doc.find("//diffResult/node").first["new_id"].to_i
# check that the changes made it into the database
assert_equal 2, Node.find(new_node_id).tags.size, "new node should have two tags"
@@ -267,26 +506,27 @@ EOF
# create a diff which references several changesets, which should cause
# a rollback and none of the diff gets committed
def test_upload_invalid_changesets
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
# simple diff to create a node way and relation using placeholders
diff = <
-
-
+
+
-
+
-
+
@@ -300,7 +540,7 @@ EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :conflict,
"uploading a diff with multiple changsets should have failed"
@@ -312,7 +552,8 @@ EOF
##
# upload multiple versions of the same element in the same diff.
def test_upload_multiple_valid
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
# change the location of a node multiple times, each time referencing
# the last version. doesn't this depend on version numbers being
@@ -320,43 +561,49 @@ EOF
diff = <
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :success,
"can't upload multiple versions of an element in a diff: #{@response.body}"
+
+ # check the response is well-formed. its counter-intuitive, but the
+ # API will return multiple elements with the same ID and different
+ # version numbers for each change we made.
+ assert_select "diffResult>node", 8
end
##
# upload multiple versions of the same element in the same diff, but
# keep the version numbers the same.
def test_upload_multiple_duplicate
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
diff = <
-
-
+
+
EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :conflict,
"shouldn't be able to upload the same element twice in a diff: #{@response.body}"
end
@@ -364,21 +611,869 @@ EOF
##
# try to upload some elements without specifying the version
def test_upload_missing_version
- basic_authorization "test@openstreetmap.org", "test"
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
diff = <
-
+
EOF
# upload it
content diff
- post :upload, :id => 1
+ post :upload, :id => cs_id
assert_response :bad_request,
"shouldn't be able to upload an element without version: #{@response.body}"
end
+
+ ##
+ # try to upload with commands other than create, modify, or delete
+ def test_action_upload_invalid
+ basic_authorization users(:public_user).email, "test"
+ cs_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+EOF
+ content diff
+ post :upload, :id => cs_id
+ assert_response :bad_request, "Shouldn't be able to upload a diff with the action ping"
+ assert_equal @response.body, "Unknown action ping, choices are create, modify, delete."
+ end
+
+ ##
+ # upload a valid changeset which has a mixture of whitespace
+ # to check a bug reported by ivansanchez (#1565).
+ def test_upload_whitespace_valid
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "can't upload a valid diff with whitespace variations to changeset: #{@response.body}"
+
+ # check the response is well-formed
+ assert_select "diffResult>node", 2
+ assert_select "diffResult>relation", 1
+
+ # check that the changes made it into the database
+ assert_equal 1, Node.find(1).tags.size, "node 1 should now have one tag"
+ assert_equal 0, Relation.find(1).tags.size, "relation 1 should now have no tags"
+ end
+
+ ##
+ # upload a valid changeset which has a mixture of whitespace
+ # to check a bug reported by ivansanchez.
+ def test_upload_reuse_placeholder_valid
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "can't upload a valid diff with re-used placeholders to changeset: #{@response.body}"
+
+ # check the response is well-formed
+ assert_select "diffResult>node", 3
+ assert_select "diffResult>node[old_id=-1]", 3
+ end
+
+ ##
+ # test what happens if a diff upload re-uses placeholder IDs in an
+ # illegal way.
+ def test_upload_placeholder_invalid
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :bad_request,
+ "shouldn't be able to re-use placeholder IDs"
+ end
+
+ ##
+ # test that uploading a way referencing invalid placeholders gives a
+ # proper error, not a 500.
+ def test_upload_placeholder_invalid_way
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :bad_request,
+ "shouldn't be able to use invalid placeholder IDs"
+ assert_equal "Placeholder node not found for reference -4 in way -1", @response.body
+
+ # the same again, but this time use an existing way
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :bad_request,
+ "shouldn't be able to use invalid placeholder IDs"
+ assert_equal "Placeholder node not found for reference -4 in way 1", @response.body
+ end
+
+ ##
+ # test that uploading a relation referencing invalid placeholders gives a
+ # proper error, not a 500.
+ def test_upload_placeholder_invalid_relation
+ basic_authorization users(:public_user).email, "test"
+ changeset_id = changesets(:public_user_first_change).id
+
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :bad_request,
+ "shouldn't be able to use invalid placeholder IDs"
+ assert_equal "Placeholder Node not found for reference -4 in relation -1.", @response.body
+
+ # the same again, but this time use an existing way
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :bad_request,
+ "shouldn't be able to use invalid placeholder IDs"
+ assert_equal "Placeholder Way not found for reference -1 in relation 1.", @response.body
+ end
+
+ ##
+ # test what happens if a diff is uploaded containing only a node
+ # move.
+ def test_upload_node_move
+ basic_authorization users(:public_user).email, "test"
+
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :success
+ changeset_id = @response.body.to_i
+
+ old_node = current_nodes(:visible_node)
+
+ diff = XML::Document.new
+ diff.root = XML::Node.new "osmChange"
+ modify = XML::Node.new "modify"
+ xml_old_node = old_node.to_xml_node
+ xml_old_node["lat"] = (2.0).to_s
+ xml_old_node["lon"] = (2.0).to_s
+ xml_old_node["changeset"] = changeset_id.to_s
+ modify << xml_old_node
+ diff.root << modify
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "diff should have uploaded OK"
+
+ # check the bbox
+ changeset = Changeset.find(changeset_id)
+ assert_equal 1*SCALE, changeset.min_lon, "min_lon should be 1 degree"
+ assert_equal 2*SCALE, changeset.max_lon, "max_lon should be 2 degrees"
+ assert_equal 1*SCALE, changeset.min_lat, "min_lat should be 1 degree"
+ assert_equal 2*SCALE, changeset.max_lat, "max_lat should be 2 degrees"
+ end
+
+ ##
+ # test what happens if a diff is uploaded adding a node to a way.
+ def test_upload_way_extend
+ basic_authorization users(:public_user).email, "test"
+
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :success
+ changeset_id = @response.body.to_i
+
+ old_way = current_ways(:visible_way)
+
+ diff = XML::Document.new
+ diff.root = XML::Node.new "osmChange"
+ modify = XML::Node.new "modify"
+ xml_old_way = old_way.to_xml_node
+ nd_ref = XML::Node.new "nd"
+ nd_ref["ref"] = current_nodes(:visible_node).id.to_s
+ xml_old_way << nd_ref
+ xml_old_way["changeset"] = changeset_id.to_s
+ modify << xml_old_way
+ diff.root << modify
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "diff should have uploaded OK"
+
+ # check the bbox
+ changeset = Changeset.find(changeset_id)
+ assert_equal 1*SCALE, changeset.min_lon, "min_lon should be 1 degree"
+ assert_equal 3*SCALE, changeset.max_lon, "max_lon should be 3 degrees"
+ assert_equal 1*SCALE, changeset.min_lat, "min_lat should be 1 degree"
+ assert_equal 3*SCALE, changeset.max_lat, "max_lat should be 3 degrees"
+ end
+
+ ##
+ # test for more issues in #1568
+ def test_upload_empty_invalid
+ basic_authorization users(:public_user).email, "test"
+
+ [ "",
+ "",
+ "",
+ ""
+ ].each do |diff|
+ # upload it
+ content diff
+ post :upload, :id => changesets(:public_user_first_change).id
+ assert_response(:success, "should be able to upload " +
+ "empty changeset: " + diff)
+ end
+ end
+
+ ##
+ # when we make some simple changes we get the same changes back from the
+ # diff download.
+ def test_diff_download_simple
+ ## First try with the normal user, which should get a forbidden
+ basic_authorization(users(:normal_user).email, "test")
+
+ # create a temporary changeset
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :forbidden
+
+
+
+ ## Now try with the public user
+ basic_authorization(users(:public_user).email, "test")
+
+ # create a temporary changeset
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :success
+ changeset_id = @response.body.to_i
+
+ # add a diff to it
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "can't upload multiple versions of an element in a diff: #{@response.body}"
+
+ get :download, :id => changeset_id
+ assert_response :success
+
+ assert_select "osmChange", 1
+ assert_select "osmChange>modify", 8
+ assert_select "osmChange>modify>node", 8
+ end
+
+ ##
+ # culled this from josm to ensure that nothing in the way that josm
+ # is formatting the request is causing it to fail.
+ #
+ # NOTE: the error turned out to be something else completely!
+ def test_josm_upload
+ basic_authorization(users(:public_user).email, "test")
+
+ # create a temporary changeset
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :success
+ changeset_id = @response.body.to_i
+
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+OSMFILE
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "can't upload a diff from JOSM: #{@response.body}"
+
+ get :download, :id => changeset_id
+ assert_response :success
+
+ assert_select "osmChange", 1
+ assert_select "osmChange>create>node", 9
+ assert_select "osmChange>create>way", 1
+ assert_select "osmChange>create>way>nd", 9
+ assert_select "osmChange>create>way>tag", 2
+ end
+
+ ##
+ # when we make some complex changes we get the same changes back from the
+ # diff download.
+ def test_diff_download_complex
+ basic_authorization(users(:public_user).email, "test")
+
+ # create a temporary changeset
+ content "" +
+ "" +
+ ""
+ put :create
+ assert_response :success
+ changeset_id = @response.body.to_i
+
+ # add a diff to it
+ diff = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+EOF
+
+ # upload it
+ content diff
+ post :upload, :id => changeset_id
+ assert_response :success,
+ "can't upload multiple versions of an element in a diff: #{@response.body}"
+
+ get :download, :id => changeset_id
+ assert_response :success
+
+ assert_select "osmChange", 1
+ assert_select "osmChange>create", 3
+ assert_select "osmChange>delete", 1
+ assert_select "osmChange>modify", 2
+ assert_select "osmChange>create>node", 3
+ assert_select "osmChange>delete>node", 1
+ assert_select "osmChange>modify>node", 1
+ assert_select "osmChange>modify>way", 1
+ end
+
+ ##
+ # check that the bounding box of a changeset gets updated correctly
+ ## FIXME: This should really be moded to a integration test due to the with_controller
+ def test_changeset_bbox
+ basic_authorization users(:public_user).email, "test"
+
+ # create a new changeset
+ content ""
+ put :create
+ assert_response :success, "Creating of changeset failed."
+ changeset_id = @response.body.to_i
+
+ # add a single node to it
+ with_controller(NodeController.new) do
+ content ""
+ put :create
+ assert_response :success, "Couldn't create node."
+ end
+
+ # get the bounding box back from the changeset
+ get :read, :id => changeset_id
+ assert_response :success, "Couldn't read back changeset."
+ assert_select "osm>changeset[min_lon=1.0]", 1
+ assert_select "osm>changeset[max_lon=1.0]", 1
+ assert_select "osm>changeset[min_lat=2.0]", 1
+ assert_select "osm>changeset[max_lat=2.0]", 1
+
+ # add another node to it
+ with_controller(NodeController.new) do
+ content ""
+ put :create
+ assert_response :success, "Couldn't create second node."
+ end
+
+ # get the bounding box back from the changeset
+ get :read, :id => changeset_id
+ assert_response :success, "Couldn't read back changeset for the second time."
+ assert_select "osm>changeset[min_lon=1.0]", 1
+ assert_select "osm>changeset[max_lon=2.0]", 1
+ assert_select "osm>changeset[min_lat=1.0]", 1
+ assert_select "osm>changeset[max_lat=2.0]", 1
+
+ # add (delete) a way to it, which contains a point at (3,3)
+ with_controller(WayController.new) do
+ content update_changeset(current_ways(:visible_way).to_xml,
+ changeset_id)
+ put :delete, :id => current_ways(:visible_way).id
+ assert_response :success, "Couldn't delete a way."
+ end
+
+ # get the bounding box back from the changeset
+ get :read, :id => changeset_id
+ assert_response :success, "Couldn't read back changeset for the third time."
+ # note that the 3.1 here is because of the bbox overexpansion
+ assert_select "osm>changeset[min_lon=1.0]", 1
+ assert_select "osm>changeset[max_lon=3.1]", 1
+ assert_select "osm>changeset[min_lat=1.0]", 1
+ assert_select "osm>changeset[max_lat=3.1]", 1
+ end
+
+ ##
+ # test that the changeset :include method works as it should
+ def test_changeset_include
+ basic_authorization users(:public_user).display_name, "test"
+
+ # create a new changeset
+ content ""
+ put :create
+ assert_response :success, "Creating of changeset failed."
+ changeset_id = @response.body.to_i
+
+ # NOTE: the include method doesn't over-expand, like inserting
+ # a real method does. this is because we expect the client to
+ # know what it is doing!
+ check_after_include(changeset_id, 1, 1, [ 1, 1, 1, 1])
+ check_after_include(changeset_id, 3, 3, [ 1, 1, 3, 3])
+ check_after_include(changeset_id, 4, 2, [ 1, 1, 4, 3])
+ check_after_include(changeset_id, 2, 2, [ 1, 1, 4, 3])
+ check_after_include(changeset_id, -1, -1, [-1, -1, 4, 3])
+ check_after_include(changeset_id, -2, 5, [-2, -1, 4, 5])
+ end
+
+ ##
+ # test the query functionality of changesets
+ def test_query
+ get :query, :bbox => "-10,-10, 10, 10"
+ assert_response :success, "can't get changesets in bbox"
+ assert_changesets [1,4,6]
+
+ get :query, :bbox => "4.5,4.5,4.6,4.6"
+ assert_response :success, "can't get changesets in bbox"
+ assert_changesets [1]
+
+ # can't get changesets of user 1 without authenticating
+ get :query, :user => users(:normal_user).id
+ assert_response :not_found, "shouldn't be able to get changesets by non-public user"
+
+ # but this should work
+ basic_authorization "test@openstreetmap.org", "test"
+ get :query, :user => users(:normal_user).id
+ assert_response :success, "can't get changesets by user"
+ assert_changesets [1,3,6]
+
+ get :query, :user => users(:normal_user).id, :open => true
+ assert_response :success, "can't get changesets by user and open"
+ assert_changesets [1]
+
+ get :query, :time => '2007-12-31'
+ assert_response :success, "can't get changesets by time-since"
+ assert_changesets [1,2,4,5,6]
+
+ get :query, :time => '2008-01-01T12:34Z'
+ assert_response :success, "can't get changesets by time-since with hour"
+ assert_changesets [1,2,4,5,6]
+
+ get :query, :time => '2007-12-31T23:59Z,2008-01-01T00:01Z'
+ assert_response :success, "can't get changesets by time-range"
+ assert_changesets [1,4,5,6]
+
+ get :query, :open => 'true'
+ assert_response :success, "can't get changesets by open-ness"
+ assert_changesets [1,2,4]
+ end
+
+ ##
+ # check that errors are returned if garbage is inserted
+ # into query strings
+ def test_query_invalid
+ [ "abracadabra!",
+ "1,2,3,F",
+ ";drop table users;"
+ ].each do |bbox|
+ get :query, :bbox => bbox
+ assert_response :bad_request, "'#{bbox}' isn't a bbox"
+ end
+
+ [ "now()",
+ "00-00-00",
+ ";drop table users;",
+ ",",
+ "-,-"
+ ].each do |time|
+ get :query, :time => time
+ assert_response :bad_request, "'#{time}' isn't a valid time range"
+ end
+
+ [ "me",
+ "foobar",
+ "-1",
+ "0"
+ ].each do |uid|
+ get :query, :user => uid
+ assert_response :bad_request, "'#{uid}' isn't a valid user ID"
+ end
+ end
+
+ ##
+ # check updating tags on a changeset
+ def test_changeset_update
+ ## First try with the non-public user
+ changeset = changesets(:normal_user_first_change)
+ new_changeset = changeset.to_xml
+ new_tag = XML::Node.new "tag"
+ new_tag['k'] = "tagtesting"
+ new_tag['v'] = "valuetesting"
+ new_changeset.find("//osm/changeset").first << new_tag
+ content new_changeset
+
+ # try without any authorization
+ put :update, :id => changeset.id
+ assert_response :unauthorized
+
+ # try with the wrong authorization
+ basic_authorization users(:public_user).email, "test"
+ put :update, :id => changeset.id
+ assert_response :conflict
+
+ # now this should get an unauthorized
+ basic_authorization users(:normal_user).email, "test"
+ put :update, :id => changeset.id
+ assert_require_public_data "user with their data non-public, shouldn't be able to edit their changeset"
+
+
+ ## Now try with the public user
+ changeset = changesets(:public_user_first_change)
+ new_changeset = changeset.to_xml
+ new_tag = XML::Node.new "tag"
+ new_tag['k'] = "tagtesting"
+ new_tag['v'] = "valuetesting"
+ new_changeset.find("//osm/changeset").first << new_tag
+ content new_changeset
+
+ # try without any authorization
+ @request.env["HTTP_AUTHORIZATION"] = nil
+ put :update, :id => changeset.id
+ assert_response :unauthorized
+
+ # try with the wrong authorization
+ basic_authorization users(:second_public_user).email, "test"
+ put :update, :id => changeset.id
+ assert_response :conflict
+
+ # now this should work...
+ basic_authorization users(:public_user).email, "test"
+ put :update, :id => changeset.id
+ assert_response :success
+
+ assert_select "osm>changeset[id=#{changeset.id}]", 1
+ assert_select "osm>changeset>tag", 2
+ assert_select "osm>changeset>tag[k=tagtesting][v=valuetesting]", 1
+ end
+
+ ##
+ # check that a user different from the one who opened the changeset
+ # can't modify it.
+ def test_changeset_update_invalid
+ basic_authorization users(:public_user).email, "test"
+
+ changeset = changesets(:normal_user_first_change)
+ new_changeset = changeset.to_xml
+ new_tag = XML::Node.new "tag"
+ new_tag['k'] = "testing"
+ new_tag['v'] = "testing"
+ new_changeset.find("//osm/changeset").first << new_tag
+
+ content new_changeset
+ put :update, :id => changeset.id
+ assert_response :conflict
+ end
+
+ ##
+ # check that a changeset can contain a certain max number of changes.
+ ## FIXME should be changed to an integration test due to the with_controller
+ def test_changeset_limits
+ basic_authorization users(:public_user).email, "test"
+
+ # open a new changeset
+ content ""
+ put :create
+ assert_response :success, "can't create a new changeset"
+ cs_id = @response.body.to_i
+
+ # start the counter just short of where the changeset should finish.
+ offset = 10
+ # alter the database to set the counter on the changeset directly,
+ # otherwise it takes about 6 minutes to fill all of them.
+ changeset = Changeset.find(cs_id)
+ changeset.num_changes = Changeset::MAX_ELEMENTS - offset
+ changeset.save!
+
+ with_controller(NodeController.new) do
+ # create a new node
+ content ""
+ put :create
+ assert_response :success, "can't create a new node"
+ node_id = @response.body.to_i
+
+ get :read, :id => node_id
+ assert_response :success, "can't read back new node"
+ node_doc = XML::Parser.string(@response.body).parse
+ node_xml = node_doc.find("//osm/node").first
+
+ # loop until we fill the changeset with nodes
+ offset.times do |i|
+ node_xml['lat'] = rand.to_s
+ node_xml['lon'] = rand.to_s
+ node_xml['version'] = (i+1).to_s
+
+ content node_doc
+ put :update, :id => node_id
+ assert_response :success, "attempt #{i} should have succeeded"
+ end
+
+ # trying again should fail
+ node_xml['lat'] = rand.to_s
+ node_xml['lon'] = rand.to_s
+ node_xml['version'] = offset.to_s
+
+ content node_doc
+ put :update, :id => node_id
+ assert_response :conflict, "final attempt should have failed"
+ end
+
+ changeset = Changeset.find(cs_id)
+ assert_equal Changeset::MAX_ELEMENTS + 1, changeset.num_changes
+
+ # check that the changeset is now closed as well
+ assert(!changeset.is_open?,
+ "changeset should have been auto-closed by exceeding " +
+ "element limit.")
+ end
+
+ # This should display the last 20 changesets closed.
+ def test_list
+ @changesets = Changeset.find(:all, :order => "created_at DESC", :conditions => ['min_lat IS NOT NULL'], :limit=> 20)
+ assert @changesets.size <= 20
+ get :list
+ assert_response :success
+ assert_template "list"
+ # Now check that all 20 (or however many were returned) changesets are in the html
+ assert_select "h1", :text => "Recent Changes", :count => 1
+ assert_select "table[id='keyvalue'] tr", :count => @changesets.size + 1
+ @changesets.each do |changeset|
+ # FIXME this test needs rewriting - test for table contents
+ end
+ end
+
+ #------------------------------------------------------------
+ # utility functions
+ #------------------------------------------------------------
+
+ ##
+ # boilerplate for checking that certain changesets exist in the
+ # output.
+ def assert_changesets(ids)
+ assert_select "osm>changeset", ids.size
+ ids.each do |id|
+ assert_select "osm>changeset[id=#{id}]", 1
+ end
+ end
+
+ ##
+ # call the include method and assert properties of the bbox
+ def check_after_include(changeset_id, lon, lat, bbox)
+ content ""
+ post :expand_bbox, :id => changeset_id
+ assert_response :success, "Setting include of changeset failed: #{@response.body}"
+
+ # check exactly one changeset
+ assert_select "osm>changeset", 1
+ assert_select "osm>changeset[id=#{changeset_id}]", 1
+
+ # check the bbox
+ doc = XML::Parser.string(@response.body).parse
+ changeset = doc.find("//osm/changeset").first
+ assert_equal bbox[0], changeset['min_lon'].to_f, "min lon"
+ assert_equal bbox[1], changeset['min_lat'].to_f, "min lat"
+ assert_equal bbox[2], changeset['max_lon'].to_f, "max lon"
+ assert_equal bbox[3], changeset['max_lat'].to_f, "max lat"
+ end
+
+ ##
+ # update the changeset_id of a way element
+ def update_changeset(xml, changeset_id)
+ xml_attr_rewrite(xml, 'changeset', changeset_id)
+ end
+
+ ##
+ # update an attribute in a way element
+ def xml_attr_rewrite(xml, name, value)
+ xml.find("//osm/way").first[name] = value.to_s
+ return xml
+ end
end