filesystem does not fully support 'mmap'. A notable candidate is virtualbox's
vboxfs.
-### I see the error: "clang: Command not found" on CentOS
-
-On CentOS 7 users reported `/opt/rh/llvm-toolset-7/root/usr/bin/clang: Command not found`.
-Double-check clang is installed. Instead of `make` try running `make CLANG=true`.
-
### nominatim UPDATE failed: ERROR: buffer 179261 is not owned by resource owner Portal
Several users [reported this](https://github.com/openstreetmap/Nominatim/issues/1168)
to get the full error message.
-### On CentOS the website shows "Could not connect to server"
-
-`could not connect to server: No such file or directory`
-
-On CentOS v7 the PostgreSQL server is started with `systemd`. Check if
-`/usr/lib/systemd/system/httpd.service` contains a line `PrivateTmp=true`. If
-so then Apache cannot see the `/tmp/.s.PGSQL.5432` file. It's a good security
-feature, so use the
-[preferred solution](../appendix/Install-on-Centos-7.md#adding-selinux-security-settings).
-
-However, you can solve this the quick and dirty way by commenting out that line and then run
-
- sudo systemctl daemon-reload
- sudo systemctl restart httpd
-
-
### Website reports "DB Error: insufficient permissions"
The user the webserver, e.g. Apache, runs under needs to have access to the
Try `chmod a+r nominatim.so; chmod a+x nominatim.so`.
When running SELinux, make sure that the
-[context is set up correctly](../appendix/Install-on-Centos-7.md#adding-selinux-security-settings).
+[context is set up correctly](../appendix/Install-on-Centos-8.md#adding-selinux-security-settings).
When you recently updated your operating system, updated PostgreSQL to
a new version or moved files (e.g. the build directory) you should
+++ /dev/null
-#!/bin/bash
-#
-# *Note:* these installation instructions are also available in executable
-# form for use with vagrant under `vagrant/Install-on-Centos-7.sh`.
-#
-# Installing the Required Software
-# ================================
-#
-# These instructions expect that you have a freshly installed CentOS version 7.
-# Make sure all packages are up-to-date by running:
-#
- sudo yum update -y
-
-# The standard CentOS repositories don't contain all the required packages,
-# you need to enable the EPEL repository as well. To enable it on CentOS,
-# install the epel-release RPM by running:
-
- sudo yum install -y epel-release
-
-# More repositories for postgresql 11 (CentOS default 'postgresql' is 9.2), postgis
-# and llvm-toolset (https://github.com/theory/pg-semver/issues/35)
-
- sudo yum install -y https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
- sudo yum install -y centos-release-scl-rh
-
-# More repositories for PHP 7 (default is PHP 5.4)
-
- sudo yum install -y http://rpms.remirepo.net/enterprise/remi-release-7.rpm
- sudo yum-config-manager --enable remi-php72
- sudo yum update -y
-
-# Now you can install all packages needed for Nominatim:
-
-#DOCS: :::sh
-
- sudo yum install -y postgresql11-server postgresql11-contrib postgresql11-devel \
- postgis25_11 postgis25_11-utils \
- wget git cmake make gcc gcc-c++ libtool policycoreutils-python \
- devtoolset-7 llvm-toolset-7 \
- php-pgsql php php-intl libpqxx-devel \
- proj-epsg bzip2-devel proj-devel boost-devel \
- python3-pip python3-setuptools python3-devel \
- expat-devel zlib-devel libicu-dev
-
- pip3 install --user psycopg2 python-dotenv psutil Jinja2 PyICU datrie pyyaml
-
-
-#
-# System Configuration
-# ====================
-#
-# The following steps are meant to configure a fresh CentOS installation
-# for use with Nominatim. You may skip some of the steps if you have your
-# OS already configured.
-#
-# Creating Dedicated User Accounts
-# --------------------------------
-#
-# Nominatim will run as a global service on your machine. It is therefore
-# best to install it under its own separate user account. In the following
-# we assume this user is called nominatim and the installation will be in
-# /srv/nominatim. To create the user and directory run:
-#
-sudo mkdir -p /srv/nominatim #DOCS: sudo useradd -d /srv/nominatim -s /bin/bash -m nominatim
-sudo chown vagrant /srv/nominatim #DOCS:
-#
-# You may find a more suitable location if you wish.
-#
-# To be able to copy and paste instructions from this manual, export
-# user name and home directory now like this:
-#
- export USERNAME=vagrant #DOCS: export USERNAME=nominatim
- export USERHOME=/srv/nominatim
-#
-# **Never, ever run the installation as a root user.** You have been warned.
-#
-# Make sure that system servers can read from the home directory:
-
- chmod a+x $USERHOME
-
-# Setting up PostgreSQL
-# ---------------------
-#
-# CentOS does not automatically create a database cluster. Therefore, start
-# with initializing the database, then enable the server to start at boot:
-
- sudo /usr/pgsql-11/bin/postgresql-11-setup initdb
- sudo systemctl enable postgresql-11
-
-#
-# Next tune the postgresql configuration, which is located in
-# `/var/lib/pgsql/data/postgresql.conf`. See section *Postgres Tuning* in
-# [the installation page](../admin/Installation.md#postgresql-tuning)
-# for the parameters to change.
-#
-# Now start the postgresql service after updating this config file.
-
- sudo systemctl restart postgresql-11
-
-#
-# Finally, we need to add two postgres users: one for the user that does
-# the import and another for the webserver which should access the database
-# only for reading:
-#
-
- sudo -u postgres createuser -s $USERNAME
- sudo -u postgres createuser apache
-
-#
-# Installing Nominatim
-# ====================
-#
-# Building and Configuration
-# --------------------------
-#
-# Get the source code from Github and change into the source directory
-#
-if [ "x$1" == "xyes" ]; then #DOCS: :::sh
- cd $USERHOME
- git clone --recursive git://github.com/openstreetmap/Nominatim.git
- cd Nominatim
-else #DOCS:
- cd $USERHOME/Nominatim #DOCS:
-fi #DOCS:
-
-# When installing the latest source from github, you also need to
-# download the country grid:
-
-if [ ! -f data/country_osm_grid.sql.gz ]; then #DOCS: :::sh
- wget --no-verbose -O data/country_osm_grid.sql.gz https://www.nominatim.org/data/country_grid.sql.gz
-fi #DOCS:
-
-# The code must be built in a separate directory. Create this directory,
-# then configure and build Nominatim in there:
-
-#DOCS: :::sh
- mkdir $USERHOME/build
- cd $USERHOME/build
- cmake $USERHOME/Nominatim
- make
- sudo make install
-
-#
-# Setting up the Apache Webserver
-# -------------------------------
-#
-# The webserver should serve the php scripts from the website directory of your
-# [project directory](../admin/Import.md#creating-the-project-directory).
-# Therefore set up a project directory and populate the website directory:
-#
- mkdir $USERHOME/nominatim-project
- cd $USERHOME/nominatim-project
- nominatim refresh --website
-#
-# You need to create an alias to the website directory in your apache
-# configuration. Add a separate nominatim configuration to your webserver:
-
-#DOCS:```sh
-sudo tee /etc/httpd/conf.d/nominatim.conf << EOFAPACHECONF
-<Directory "$USERHOME/nominatim-project/website">
- Options FollowSymLinks MultiViews
- AddType text/html .php
- DirectoryIndex search.php
- Require all granted
-</Directory>
-
-Alias /nominatim $USERHOME/nominatim-project/website
-EOFAPACHECONF
-#DOCS:```
-
-sudo sed -i 's:#.*::' /etc/httpd/conf.d/nominatim.conf #DOCS:
-
-#
-# Then reload apache
-#
-
- sudo systemctl enable httpd
- sudo systemctl restart httpd
-
-#
-# Adding SELinux Security Settings
-# --------------------------------
-#
-# It is a good idea to leave SELinux enabled and enforcing, particularly
-# with a web server accessible from the Internet. At a minimum the
-# following SELinux labeling should be done for Nominatim:
-
- sudo semanage fcontext -a -t httpd_sys_content_t "/usr/local/nominatim/lib/lib-php(/.*)?"
- sudo semanage fcontext -a -t httpd_sys_content_t "$USERHOME/nominatim-project/website(/.*)?"
- sudo semanage fcontext -a -t lib_t "$USERHOME/nominatim-project/module/nominatim.so"
- sudo restorecon -R -v /usr/local/lib/nominatim
- sudo restorecon -R -v $USERHOME/nominatim-project
-
-
-# You need to create a minimal configuration file that tells nominatim
-# the name of your webserver user:
-
-#DOCS:```sh
-echo NOMINATIM_DATABASE_WEBUSER="apache" | tee .env
-#DOCS:```
-
-
-# Nominatim is now ready to use. Continue with
-# [importing a database from OSM data](../admin/Import.md).
projects / nominatim.git / commitdiff