require File.dirname(__FILE__) + '/../test_helper'
require 'api_controller'
-# Re-raise errors caught by the controller.
-class ApiController; def rescue_action(e) raise e end; end
-
-class ApiControllerTest < Test::Unit::TestCase
+class ApiControllerTest < ActionController::TestCase
api_fixtures
-
+
def setup
- @controller = ApiController.new
- @request = ActionController::TestRequest.new
- @response = ActionController::TestResponse.new
- end
-
- def basic_authorization(user, pass)
- @request.env["HTTP_AUTHORIZATION"] = "Basic %s" % Base64.encode64("#{user}:#{pass}")
+ super
+ @badbigbbox = %w{ -0.1,-0.1,1.1,1.1 10,10,11,11 }
+ @badmalformedbbox = %w{ -0.1 hello
+ 10N2W10.1N2.1W }
+ @badlatmixedbbox = %w{ 0,0.1,0.1,0 -0.1,80,0.1,70 0.24,54.34,0.25,54.33 }
+ @badlonmixedbbox = %w{ 80,-0.1,70,0.1 54.34,0.24,54.33,0.25 }
+ #@badlatlonoutboundsbbox = %w{ 191,-0.1,193,0.1 -190.1,89.9,-190,90 }
+ @goodbbox = %w{ -0.1,-0.1,0.1,0.1 51.1,-0.1,51.2,0
+ -0.1,%20-0.1,%200.1,%200.1 -0.1edcd,-0.1d,0.1,0.1 -0.1E,-0.1E,0.1S,0.1N S0.1,W0.1,N0.1,E0.1}
+ # That last item in the goodbbox really shouldn't be there, as the API should
+ # reall reject it, however this is to test to see if the api changes.
end
# -------------------------------------
def test_map
node = current_nodes(:used_node_1)
- bbox = "#{node.latitude-0.1},#{node.longitude-0.1},#{node.latitude+0.1},#{node.longitude+0.1}"
+ # Need to split the min/max lat/lon out into their own variables here
+ # so that we can test they are returned later.
+ minlon = node.lon-0.1
+ minlat = node.lat-0.1
+ maxlon = node.lon+0.1
+ maxlat = node.lat+0.1
+ bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
get :map, :bbox => bbox
if $VERBOSE
- print @response.body
+ print @request.to_yaml
+ print @response.body
+ end
+ assert_response :success, "Expected scucess with the map call"
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "bounds[minlon=#{minlon}][minlat=#{minlat}][maxlon=#{maxlon}][maxlat=#{maxlat}]", :count => 1
+ assert_select "node[id=#{node.id}][lat=#{node.lat}][lon=#{node.lon}][version=#{node.version}][changeset=#{node.changeset_id}][visible=#{node.visible}][timestamp=#{node.timestamp.xmlschema}]", :count => 1 do
+ # This should really be more generic
+ assert_select "tag[k='test'][v='yes']"
+ end
+ # Should also test for the ways and relation
+ end
+ end
+
+ # This differs from the above test in that we are making the bbox exactly
+ # the same as the node we are looking at
+ def test_map_inclusive
+ node = current_nodes(:used_node_1)
+ bbox = "#{node.lon},#{node.lat},#{node.lon},#{node.lat}"
+ get :map, :bbox => bbox
+ assert_response :success, "The map call should have succeeded"
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "bounds[minlon=#{node.lon}][minlat=#{node.lat}][maxlon=#{node.lon}][maxlat=#{node.lat}]", :count => 1
+ assert_select "node[id=#{node.id}][lat=#{node.lat}][lon=#{node.lon}][version=#{node.version}][changeset=#{node.changeset_id}][visible=#{node.visible}][timestamp=#{node.timestamp.xmlschema}]", :count => 1 do
+ # This should really be more generic
+ assert_select "tag[k='test'][v='yes']"
+ end
+ # Should also test for the ways and relation
end
+ end
+
+ def test_tracepoints
+ point = gpx_files(:public_trace_file)
+ minlon = point.longitude-0.001
+ minlat = point.latitude-0.001
+ maxlon = point.longitude+0.001
+ maxlat = point.latitude+0.001
+ bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
+ get :trackpoints, :bbox => bbox
assert_response :success
+ assert_select "gpx[version=1.0][creator=OpenStreetMap.org][xmlns=http://www.topografix.com/GPX/1/0]", :count => 1 do
+ assert_select "trk" do
+ assert_select "trkseg"
+ end
+ end
+ end
+
+ def test_tracepoints_trackable
+ point = gpx_files(:trackable_trace_file)
+ minlon = point.longitude-0.002
+ minlat = point.latitude-0.002
+ maxlon = point.longitude+0.002
+ maxlat = point.latitude+0.002
+ bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
+ get :trackpoints, :bbox => bbox
+ assert_response :success
+ assert_select "gpx[version=1.0][creator=OpenStreetMap.org][xmlns=http://www.topografix.com/GPX/1/0]", :count => 1 do
+ assert_select "trk", :count => 1 do
+ assert_select "trk > trkseg", :count => 2 do |trksegs|
+ trksegs.each do |trkseg|
+ assert_select trkseg, "trkpt", :count => 1 do |trkpt|
+ assert_select trkpt[0], "time", :count => 1
+ end
+ end
+ end
+ end
+ end
+ end
+
+ def test_tracepoints_identifiable
+ point = gpx_files(:identifiable_trace_file)
+ minlon = point.longitude-0.002
+ minlat = point.latitude-0.002
+ maxlon = point.longitude+0.002
+ maxlat = point.latitude+0.002
+ bbox = "#{minlon},#{minlat},#{maxlon},#{maxlat}"
+ get :trackpoints, :bbox => bbox
+ assert_response :success
+ assert_select "gpx[version=1.0][creator=OpenStreetMap.org][xmlns=http://www.topografix.com/GPX/1/0]", :count => 1 do
+ assert_select "trk", :count => 1 do
+ assert_select "trk>name", :count => 1
+ assert_select "trk>desc", :count => 1
+ assert_select "trk>url", :count => 1
+ assert_select "trkseg", :count => 1 do
+ assert_select "trkpt", :count => 1 do
+ assert_select "time", :count => 1
+ end
+ end
+ end
+ end
+ end
+
+ def test_map_without_bbox
+ ["trackpoints", "map"].each do |tq|
+ get tq
+ assert_response :bad_request
+ assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "A bbox param was expected"
+ end
+ end
+
+ def test_traces_page_less_than_0
+ -10.upto(-1) do |i|
+ get :trackpoints, :page => i, :bbox => "-0.1,-0.1,0.1,0.1"
+ assert_response :bad_request
+ assert_equal "Page number must be greater than or equal to 0", @response.body, "The page number was #{i}"
+ end
+ 0.upto(10) do |i|
+ get :trackpoints, :page => i, :bbox => "-0.1,-0.1,0.1,0.1"
+ assert_response :success, "The page number was #{i} and should have been accepted"
+ end
+ end
+
+ def test_bbox_too_big
+ @badbigbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to be too big"
+ assert_equal "The maximum bbox size is #{MAX_REQUEST_AREA}, and your request was too large. Either request a smaller area, or use planet.osm", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_malformed
+ @badmalformedbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to be malformed"
+ assert_equal "The parameter bbox is required, and must be of the form min_lon,min_lat,max_lon,max_lat", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_lon_mixedup
+ @badlonmixedbbox.each do |bbox|
+ [ "trackpoints", "map" ].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to have the longitude mixed up"
+ assert_equal "The minimum longitude must be less than the maximum longitude, but it wasn't", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ def test_bbox_lat_mixedup
+ @badlatmixedbbox.each do |bbox|
+ ["trackpoints", "map"].each do |tq|
+ get tq, :bbox => bbox
+ assert_response :bad_request, "The bbox:#{bbox} was expected to have the latitude mixed up"
+ assert_equal "The minimum latitude must be less than the maximum latitude, but it wasn't", @response.body, "bbox: #{bbox}"
+ end
+ end
+ end
+
+ # We can't actually get an out of bounds error, as the bbox is sanitised.
+ #def test_latlon_outofbounds
+ # @badlatlonoutboundsbbox.each do |bbox|
+ # [ "trackpoints", "map" ].each do |tq|
+ # get tq, :bbox => bbox
+ # #print @request.to_yaml
+ # assert_response :bad_request, "The bbox #{bbox} was expected to be out of range"
+ # assert_equal "The latitudes must be between -90 an 90, and longitudes between -180 and 180", @response.body, "bbox: #{bbox}"
+ # end
+ # end
+ #end
+
+ # MySQL and Postgres require that the C based functions are installed for
+ # this test to work. More information is available from:
+ # http://wiki.openstreetmap.org/wiki/Rails#Installing_the_quadtile_functions
+ # or by looking at the readme in db/README
+ def test_changes_simple
+ Timecop.freeze(Time.parse('2010-04-03 10:55:00'))
+ get :changes
+ assert_response :success
+ #print @response.body
+ # As we have loaded the fixtures, we can assume that there are no
+ # changes at the time we have frozen at
+ now = Time.now.getutc
+ hourago = now - 1.hour
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "changes[starttime='#{hourago.xmlschema}'][endtime='#{now.xmlschema}']", :count => 1
+ end
+ Timecop.return
+ end
+
+ def test_changes_zoom_invalid
+ zoom_to_test = %w{ p -1 0 17 one two }
+ zoom_to_test.each do |zoom|
+ get :changes, :zoom => zoom
+ assert_response :bad_request
+ assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours"
+ end
+ end
+
+ def test_changes_zoom_valid
+ 1.upto(16) do |zoom|
+ get :changes, :zoom => zoom
+ assert_response :success
+ # NOTE: there was a test here for the timing, but it was too sensitive to be a good test
+ # and it was annoying.
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "changes", :count => 1
+ end
+ end
+ end
+
+ def test_start_end_time_invalid
+
+ end
+
+ def test_start_end_time_invalid
+
+ end
+
+ def test_hours_invalid
+ invalid = %w{ -21 335 -1 0 25 26 100 one two three ping pong : }
+ invalid.each do |hour|
+ get :changes, :hours => hour
+ assert_response :bad_request, "Problem with the hour: #{hour}"
+ assert_equal @response.body, "Requested zoom is invalid, or the supplied start is after the end time, or the start duration is more than 24 hours", "Problem with the hour: #{hour}."
+ end
+ end
+
+ def test_hours_valid
+ 1.upto(24) do |hour|
+ get :changes, :hours => hour
+ assert_response :success
+ end
+ end
+
+ def test_capabilities
+ get :capabilities
+ assert_response :success
+ assert_select "osm[version='#{API_VERSION}'][generator='#{GENERATOR}']", :count => 1 do
+ assert_select "api", :count => 1 do
+ assert_select "version[minimum=#{API_VERSION}][maximum=#{API_VERSION}]", :count => 1
+ assert_select "area[maximum=#{MAX_REQUEST_AREA}]", :count => 1
+ assert_select "tracepoints[per_page=#{TRACEPOINTS_PER_PAGE}]", :count => 1
+ assert_select "changesets[maximum_elements=#{Changeset::MAX_ELEMENTS}]", :count => 1
+ end
+ end
end
-
end
projects / rails.git / blobdiff