+++ /dev/null
-# DO NOT EDIT - This file is being maintained by Chef
-
-# AWSTATS CONFIGURE FILE 6.6
-#-----------------------------------------------------------------------------
-# Copy this file into awstats.www.mydomain.conf and edit this new config file
-# to setup AWStats (See documentation in docs/ directory).
-# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
-# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
-# To include an environment variable in any parameter (AWStats will replace
-# it with its value when reading it), follow the example:
-# Parameter="__ENVNAME__"
-# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
-# the config value in an AWStats running session and can be used like others.
-#-----------------------------------------------------------------------------
-# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
-
-
-
-#-----------------------------------------------------------------------------
-# MAIN SETUP SECTION (Required to make AWStats work)
-#-----------------------------------------------------------------------------
-
-# "LogFile" contains the web, ftp or mail server log file to analyze.
-# Possible values: A full path, or a relative path from awstats.pl directory.
-# Example: "/var/log/apache/access.log"
-# Example: "../logs/mycombinedlog.log"
-# You can also use tags in this filename if you need a dynamic file name
-# depending on date or time (Replacement is made by AWStats at the beginning
-# of its execution). This is available tags :
-# %YYYY-n is replaced with 4 digits year we were n hours ago
-# %YY-n is replaced with 2 digits year we were n hours ago
-# %MM-n is replaced with 2 digits month we were n hours ago
-# %MO-n is replaced with 3 letters month we were n hours ago
-# %DD-n is replaced with day we were n hours ago
-# %HH-n is replaced with hour we were n hours ago
-# %NS-n is replaced with number of seconds at 00:00 since 1970
-# %WM-n is replaced with the week number in month (1-5)
-# %Wm-n is replaced with the week number in month (0-4)
-# %WY-n is replaced with the week number in year (01-52)
-# %Wy-n is replaced with the week number in year (00-51)
-# %DW-n is replaced with the day number in week (1-7, 1=sunday)
-# use n=24 if you need (1-7, 1=monday)
-# %Dw-n is replaced with the day number in week (0-6, 0=sunday)
-# use n=24 if you need (0-6, 0=monday)
-# Use 0 for n if you need current year, month, day, hour...
-# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
-# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
-# You can also use a pipe if log file come from a pipe :
-# Example: "gzip -d </var/log/apache/access.log.gz |"
-# If there are several log files from load balancing servers :
-# Example: "/pathtotools/logresolvemerge.pl *.log |"
-#
-LogFile="/usr/share/awstats/tools/logresolvemerge.pl /store/logs/<%= @site[:name] %>/<%= @site[:log_pattern] %> |"
-
-
-# Enter the log file type you want to analyze.
-# Possible values:
-# W - For a web log file
-# S - For a streaming log file
-# M - For a mail log file
-# F - For a ftp log file
-# Example: W
-# Default: W
-#
-LogType=W
-
-
-# Enter here your log format (Must match your web server config. See setup
-# instructions in documentation to know how to configure your web server to
-# have the required log format).
-# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
-# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
-# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
-# 3 - Webstar native log format.
-# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
-# With LogFormat=4, some features (browsers, os, keywords...) can't work.
-# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
-# you must use following keys to define the log format string (See FAQ for
-# ftp, mail or exotic web log format examples):
-# %host Client hostname or IP address (or Sender host for mail log)
-# %host_r Receiver hostname or IP address (for mail log)
-# %lognamequot Authenticated login/user with format: "john"
-# %logname Authenticated login/user with format: john
-# %time1 Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
-# %time2 Date and time with format: yyyy-mm-dd hh:mm:ss
-# %time3 Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
-# %time4 Date and time with unix timestamp format: dddddddddd
-# %methodurl Method and URL with format: "GET /index.html HTTP/x.x"
-# %methodurlnoprot Method and URL with format: "GET /index.html"
-# %method Method with format: GET
-# %url URL only with format: /index.html
-# %query Query string (used by URLWithQuery option)
-# %code Return code status (with format for web log: 999)
-# %bytesd Size of document in bytes
-# %refererquot Referer page with format: "http://from.com/from.htm"
-# %referer Referer page with format: http://from.com/from.htm
-# %uabracket User agent with format: [Mozilla/4.0 (compatible, ...)]
-# %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)"
-# %ua User agent with format: Mozilla/4.0_(compatible...)
-# %gzipin mod_gzip compression input bytes: In:XXX
-# %gzipout mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
-# %gzipratio mod_gzip compression ratio: ZZpct.
-# %deflateratio mod_deflate compression ratio with format: (ZZ)
-# %email EMail sender (for mail log)
-# %email_r EMail receiver (for mail log)
-# %virtualname Web sever virtual hostname. Use this tag when same log
-# contains data of several virtual web servers. AWStats
-# will discard records not in SiteDomain nor HostAliases
-# %cluster If log file is provided from several computers (merged by
-# logresolvemerge.pl), use this to define cluster id field.
-# %extraX Another field that you plan to use for building a
-# personalized report with ExtraSection feature (See later).
-# If your log format has some fields not included in this list, use:
-# %other Means another not used field
-# %otherquot Means another not used double quoted field
-#
-# Examples for Apache combined logs (following two examples are equivalent):
-# LogFormat = 1
-# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
-#
-# Example for IIS:
-# LogFormat = 2
-#
-LogFormat=1
-
-
-# If your log field's separator is not a space, you can change this parameter.
-# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
-# Backslash can be used as escape character.
-# Example: " "
-# Example: "\t"
-# Example: "\|"
-# Example: ","
-# Default: " "
-#
-LogSeparator=" "
-
-
-# "SiteDomain" must contain the main domain name, or the main intranet web
-# server name, used to reach the web site.
-# If you share the same log file for several virtual web servers, this
-# parameter is used to tell AWStats to filter record that contains records for
-# this virtual host name only (So check that this virtual hostname can be
-# found in your log file and use a personalized log format that include the
-# %virtualname tag).
-# But for multi hosting a better solution is to have one log file for each
-# virtual web server. In this case, this parameter is only used to generate
-# full URL's links when ShowLinksOnUrl option is set to 1.
-# If analyzing mail log, enter here the domain name of mail server.
-# Example: "myintranetserver"
-# Example: "www.domain.com"
-# Example: "ftp.domain.com"
-# Example: "domain.com"
-#
-SiteDomain="<%= @site[:name] %>"
-
-
-# Enter here all other possible domain names, addresses or virtual host
-# aliases someone can use to access your site. Try to keep only the minimum
-# number of possible names/addresses to have the best performances.
-# You can repeat the "SiteDomain" value in this list.
-# This parameter is used to analyze referer field in log file and to help
-# AWStats to know if a referer URL is a local URL of same site or an URL of
-# another site.
-# Note: Use space between each value.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Note: You can also use @/mypath/myfile if list of aliases are in a file.
-# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
-#
-HostAliases="localhost 127.0.0.1"
-
-
-# If you want to have hosts reported by name instead of ip address, AWStats
-# need to make reverse DNS lookups (if not already done in your log file).
-# With DNSLookup to 0, all hosts will be reported by their IP addresses and
-# not by the full hostname of visitors (except if names are already available
-# in log file).
-# If you want/need to set DNSLookup to 1, don't forget that this will reduce
-# dramatically AWStats update process speed. Do not use on large web sites.
-# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
-# Note: Result of DNS Lookup can be used to build the Country report. However
-# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
-# have an accurate Country report with no need of DNS Lookup.
-# Possible values:
-# 0 - No DNS Lookup
-# 1 - DNS Lookup is fully enabled
-# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
-# Default: 2
-#
-DNSLookup=0
-
-
-# When AWStats updates its statistics, it stores results of its analysis in
-# files (AWStats database). All those files are written in the directory
-# defined by the "DirData" parameter. Set this value to the directory where
-# you want AWStats to save its database and working files into.
-# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
-# feature (see later), you need "Write" permissions by web server user on this
-# directory (and "Modify" for Windows NTFS file systems).
-# Example: "/var/lib/awstats"
-# Example: "../data"
-# Example: "C:/awstats_data_dir"
-# Default: "." (means same directory as awstats.pl)
-#
-DirData="/var/lib/awstats"
-
-
-# Relative or absolute web URL of your awstats cgi-bin directory.
-# This parameter is used only when AWStats is run from command line
-# with -output option (to generate links in HTML reported page).
-# Example: "/awstats"
-# Default: "/cgi-bin" (means awstats.pl is in "/yourwwwroot/cgi-bin")
-#
-DirCgi="/cgi-bin"
-
-
-# Relative or absolute web URL of your awstats icon directory.
-# If you build static reports ("... -output > outputpath/output.html"), enter
-# path of icon directory relative to the output directory 'outputpath'.
-# Example: "/awstatsicons"
-# Example: "../icon"
-# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
-#
-DirIcons="/awstats-icon"
-
-
-# When this parameter is set to 1, AWStats adds a button on report page to
-# allow to "update" statistics from a web browser. Warning, when "update" is
-# made from a browser, AWStats is run as a CGI by the web server user defined
-# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
-# IIS), so the "DirData" directory and all already existing history files
-# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
-# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
-# Warning: Update process can be long so you might experience "time out"
-# browser errors if you don't launch AWStats frequently enough.
-# When set to 0, update is only made when AWStats is run from the command
-# line interface (or a task scheduler).
-# Possible values: 0 or 1
-# Default: 0
-#
-AllowToUpdateStatsFromBrowser=0
-
-
-# AWStats saves and sorts its database on a month basis (except if using
-# databasebreak option from command line).
-# However, if you choose the -month=all from command line or
-# value '-Year-' from CGI combo form to have a report for all year, AWStats
-# needs to reload all data for full year (each month), and sort them,
-# requiring a large amount of time, memory and CPU. This might be a problem
-# for web hosting providers that offer AWStats for large sites, on shared
-# servers, to non CPU cautious customers.
-# For this reason, the 'full year' is only enabled on Command Line by default.
-# You can change this by setting this parameter to 0, 1, 2 or 3.
-# Possible values:
-# 0 - Never allowed
-# 1 - Allowed on CLI only, -Year- value in combo is not visible
-# 2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
-# 3 - Possible on CLI and CGI
-# Default: 2
-#
-AllowFullYearView=2
-
-
-
-#-----------------------------------------------------------------------------
-# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
-#-----------------------------------------------------------------------------
-
-# When the update process runs, AWStats can set a lock file in TEMP or TMP
-# directory. This lock is to avoid to have 2 update processes running at the
-# same time to prevent unknown conflicts problems and avoid DoS attacks when
-# AllowToUpdateStatsFromBrowser is set to 1.
-# Because, when you use lock file, you can experience sometimes problems in
-# lock file not correctly removed (killed process for example requires that
-# you remove the file manualy), this option is not enabled by default (Do
-# not enable this option with no console server access).
-# Change : Effective immediatly
-# Possible values: 0 or 1
-# Default: 0
-#
-EnableLockForUpdate=0
-
-
-# AWStats can do reverse DNS lookups through a static DNS cache file that was
-# previously created manually. If no path is given in static DNS cache file
-# name, AWStats will search DirData directory. This file is never changed.
-# This option is not used if DNSLookup=0.
-# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
-# or just 'ipaddress resolved_hostname'
-# Change : Effective for new updates only
-# Example: "/mydnscachedir/dnscache"
-# Default: "dnscache.txt"
-#
-DNSStaticCacheFile="dnscache.txt"
-
-
-# AWStats can do reverse DNS lookups through a DNS cache file that was created
-# by a previous run of AWStats. This file is erased and recreated after each
-# statistics update process. You don't need to create and/or edit it.
-# AWStats will read and save this file in DirData directory.
-# This option is used only if DNSLookup=1.
-# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
-# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
-# Change : Effective for new updates only
-# Example: "/mydnscachedir/dnscachelastupdate"
-# Default: "dnscachelastupdate.txt"
-#
-DNSLastUpdateCacheFile="dnscachelastupdate.txt"
-
-
-# You can specify specific IP addresses that should NOT be looked up in DNS.
-# This option is used only if DNSLookup=1.
-# Note: Use space between each value.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "123.123.123.123 REGEX[^192\.168\.]"
-# Default: ""
-#
-SkipDNSLookupFor=""
-
-
-# The following two parameters allow you to protect a config file from being
-# read by AWStats when called from a browser if web user has not been
-# authenticated. Your AWStats program must be in a web protected "realm" (With
-# Apache, you can use .htaccess files to do so. With other web servers, see
-# your server setup manual).
-# Change : Effective immediatly
-# Possible values: 0 or 1
-# Default: 0
-#
-AllowAccessFromWebToAuthenticatedUsersOnly=0
-
-
-# This parameter gives the list of all authorized authenticated users to view
-# statistics for this domain/config file. This parameter is used only if
-# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
-# Change : Effective immediatly
-# Example: "user1 user2"
-# Example: "__REMOTE_USER__"
-# Default: ""
-#
-AllowAccessFromWebToFollowingAuthenticatedUsers=""
-
-
-# When this parameter is defined to something, the IP address of the user that
-# reads its statistics from a browser (when AWStats is used as a CGI) is
-# checked and must match one of the IP address values or ranges.
-# Change : Effective immediatly
-# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
-# Default: ""
-#
-AllowAccessFromWebToFollowingIPAddresses=""
-
-
-# If the "DirData" directory (see above) does not exist, AWStats return an
-# error. However, you can ask AWStats to create it.
-# This option can be used by some Web Hosting Providers that has defined a
-# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
-# don't want to have to create a new directory each time they add a new user.
-# Change : Effective immediatly
-# Possible values: 0 or 1
-# Default: 0
-#
-CreateDirDataIfNotExists=0
-
-
-# You can choose in which format the Awstats history database is saved.
-# Note: Using "xml" format make AWStats building database files three times
-# larger than using "text" format.
-# Change : Database format is switched after next update
-# Possible values: text or xml
-# Default: text
-#
-BuildHistoryFormat=text
-
-
-# If you prefer having the report output pages be built as XML compliant pages
-# instead of simple HTML pages, you can set this to 'xhtml' (May not work
-# properly with old browsers).
-# Change : Effective immediatly
-# Possible values: html or xhtml
-# Default: html
-#
-BuildReportFormat=html
-
-
-# AWStats databases can be updated from command line of from a browser (when
-# used as a cgi program). So AWStats database files need write permission
-# for both command line user and default web server user (nobody for Unix,
-# IUSR_xxx for IIS/Windows,...).
-# To avoid permission problems between update process (run by an admin user)
-# and CGI process (ran by a low level user), AWStats can save its database
-# files with read and write permissions for everyone.
-# By default, AWStats keeps default user permissions on updated files. If you
-# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-SaveDatabaseFilesWithPermissionsForEveryone=0
-
-
-# AWStats can purge log file, after analyzing it. Note that AWStats is able
-# to detect new lines in a log file, to process only them, so you can launch
-# AWStats as often as you want, even with this parameter to 0.
-# With 0, no purge is made, so you must use a scheduled task or a web server
-# that make this purge frequently.
-# With 1, the purge of the log file is made each time AWStats update is run.
-# This parameter doesn't work with IIS (This web server doesn't let its log
-# file to be purged).
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-PurgeLogFile=0
-
-
-# When PurgeLogFile is setup to 1, AWStats will clean your log file after
-# processing it. You can however keep an archive file of all processed log
-# records by setting this parameter (For example if you want to use another
-# log analyzer). The archived log file is saved in "DirData" with name
-# awstats_archive.configname[.suffix].log
-# This parameter is not used if PurgeLogFile=0
-# Change : Effective for new updates only
-# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
-# Example: 1
-# Example: %YYYY%MM%DD
-# Default: 0
-#
-ArchiveLogRecords=0
-
-
-# Each time you run the update process, AWStats overwrites the 'historic file'
-# for the month (awstatsMMYYYY[.*].txt) with the updated one.
-# When write errors occurs (IO, disk full,...), this historic file can be
-# corrupted and must be deleted. Because this file contains information of all
-# past processed log files, you will loose old stats if removed. So you can
-# ask AWStats to save last non corrupted file in a .bak file. This file is
-# stored in "DirData" directory with other 'historic files'.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-KeepBackupOfHistoricFiles=0
-
-
-# Default index page name for your web server.
-# Change : Effective for new updates only
-# Example: "index.php index.html default.html"
-# Default: "index.html"
-#
-DefaultFile="index.html"
-
-
-# Do not include access from clients that match following criteria.
-# If your log file contains IP addresses in host field, you must enter here
-# matching IP addresses criteria.
-# If DNS lookup is already done in your log file, you must enter here hostname
-# criteria, else enter ip address criteria.
-# The opposite parameter of "SkipHosts" is "OnlyHosts".
-# Note: Use space between each value. This parameter is not case sensitive.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
-# Example: "localhost REGEX[^.*\.localdomain$]"
-# Default: ""
-#
-SkipHosts=""
-
-
-# Do not include access from clients with a user agent that match following
-# criteria. If you want to exclude a robot, you should update the robots.pm
-# file instead of this parameter.
-# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
-# Note: Use space between each value. This parameter is not case sensitive.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "konqueror REGEX[ua_test_v\d\.\d]"
-# Default: ""
-#
-SkipUserAgents=""
-
-
-# Use SkipFiles to ignore access to URLs that match one of following entries.
-# You can enter a list of not important URLs (like framed menus, hidden pages,
-# etc...) to exclude them from statistics. You must enter here exact relative
-# URL as found in log file, or a matching REGEX value. Check apply on URL with
-# all its query paramaters.
-# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
-# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
-# The opposite parameter of "SkipFiles" is "OnlyFiles".
-# Note: Use space between each value. This parameter is or not case sensitive
-# depending on URLNotCaseSensitive parameter.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
-# Default: ""
-#
-SkipFiles=""
-
-
-# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
-# referrer. Parameter must receive a local file name containing rules applied
-# on referrer field. If parameter is empty, no filter is applied.
-# An example of such a file is available in lib/blacklist.txt
-# You can download updated version at http://www.jayallen.org/comment_spam/
-# Change : Effective for new updates only
-# Example: "/mylibpath/blacklist.txt"
-# Default: ""
-#
-# WARNING!! Using this feature make AWStats running very slower (5 times slower
-# with black list file provided with AWStats !
-#
-SkipReferrersBlackList=""
-
-
-# Include in stats, only accesses from hosts that match one of following
-# entries. For example, if you want AWStats to filter access to keep only
-# stats for visits from particular hosts, you can add those host names in
-# this parameter.
-# If DNS lookup is already done in your log file, you must enter here hostname
-# criteria, else enter ip address criteria.
-# The opposite parameter of "OnlyHosts" is "SkipHosts".
-# Note: Use space between each value. This parameter is not case sensitive.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
-# Default: ""
-#
-OnlyHosts=""
-
-
-# Include in stats, only accesses from user agent that match one of following
-# entries. For example, if you want AWStats to filter access to keep only
-# stats for visits from particular browsers, you can add their user agents
-# string in this parameter.
-# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
-# Note: Use space between each value. This parameter is not case sensitive.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "msie"
-# Default: ""
-#
-OnlyUserAgents=""
-
-
-# Include in stats, only accesses to URLs that match one of following entries.
-# For example, if you want AWStats to filter access to keep only stats that
-# match a particular string, like a particular directory, you can add this
-# directory name in this parameter.
-# The opposite parameter of "OnlyFiles" is "SkipFiles".
-# Note: Use space between each value. This parameter is or not case sensitive
-# depending on URLNotCaseSensitive parameter.
-# Note: You can use regular expression values writing value with REGEX[value].
-# Change : Effective for new updates only
-# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
-# Default: ""
-#
-OnlyFiles=""
-
-
-# Add here a list of kind of url (file extension) that must be counted as
-# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
-# image extensions as they are hit downloaded that must be counted but they
-# are not viewed pages. URLs with such extensions are not included in the TOP
-# Pages/URL report.
-# Note: If you want to exclude particular URLs from stats (No Pages and no
-# Hits reported), you must use SkipFiles parameter.
-# Change : Effective for new updates only
-# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
-# Example: ""
-# Default: "css js class gif jpg jpeg png bmp ico"
-#
-NotPageList="css js class gif jpg jpeg png bmp ico swf"
-
-
-# By default, AWStats considers that records found in web log file are
-# successful hits if HTTP code returned by server is a valid HTTP code (200
-# and 304). Any other code are reported in HTTP status chart.
-# Note that HTTP 'control codes', like redirection (302, 305) are not added by
-# default in this list as they are not pages seen by a visitor but are
-# protocol exchange codes to tell the browser to ask another page. Because
-# this other page will be counted and seen with a 200 or 304 code, if you
-# add such codes, you will have 2 pages viewed reported for only one in facts.
-# Change : Effective for new updates only
-# Example: "200 304 302 305"
-# Default: "200 304"
-#
-ValidHTTPCodes="200 304"
-
-
-# By default, AWStats considers that records found in mail log file are
-# successful mail transfers if field that represent return code in analyzed
-# log file match values defined by this parameter.
-# Change : Effective for new updates only
-# Example: "1 250 200"
-# Default: "1 250"
-#
-ValidSMTPCodes="1 250"
-
-
-# Some web servers on some Operating systems (IIS-Windows) consider that a
-# login with same value but different case are the same login. To tell AWStats
-# to also consider them as one, set this parameter to 1.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-AuthenticatedUsersNotCaseSensitive=0
-
-
-# Some web servers on some Operating systems (IIS-Windows) considers that two
-# URLs with same value but different case are the same URL. To tell AWStats to
-# also considers them as one, set this parameter to 1.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-URLNotCaseSensitive=0
-
-
-# Keep or remove the anchor string you can find in some URLs.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-URLWithAnchor=0
-
-
-# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
-# /mypage.html?param1=value1¶m2=value2
-# However, some servers/sites use also other chars to isolate dynamic part of
-# their URLs. You can complete this list with all such characters.
-# Change : Effective for new updates only
-# Example: "?;,"
-# Default: "?;"
-#
-URLQuerySeparators="?;"
-
-
-# Keep or remove the query string to the URL in the statistics for individual
-# pages. This is primarily used to differentiate between the URLs of dynamic
-# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
-# different pages.
-# Warning, when set to 1, memory required to run AWStats is dramatically
-# increased if you have a lot of changing URLs (for example URLs with a random
-# id inside). Such web sites should not set this option to 1 or use seriously
-# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually
-# URLWithQueryWithoutFollowingParameters).
-# Change : Effective for new updates only
-# Possible values:
-# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
-# 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y")
-# Default: 0
-#
-URLWithQuery=0
-
-
-# When URLWithQuery is on, you will get the full URL with all parameters in
-# URL reports. But among thoose parameters, sometimes you don't need a
-# particular parameter because it does not identify the page or because it's
-# a random ID changing for each access even if URL points to same page. In
-# such cases, it is higly recommanded to ask AWStats to keep only parameters
-# you need (if you know them) before counting, manipulating and storing URL.
-# Enter here list of wanted parameters. For example, with "param", one hit on
-# /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r
-# will be reported as 2 hits on /mypage.cgi?param=abc
-# This parameter is not used when URLWithQuery is 0 and can't be used with
-# URLWithQueryWithoutFollowingParameters.
-# Change : Effective for new updates only
-# Example: "param"
-# Default: ""
-#
-URLWithQueryWithOnlyFollowingParameters=""
-
-
-# When URLWithQuery is on, you will get the full URL with all parameters in
-# URL reports. But among thoose parameters, sometimes you don't need a
-# particular parameter because it does not identify the page or because it's
-# a random ID changing for each access even if URL points to same page. In
-# such cases, it is higly recommanded to ask AWStats to remove such parameters
-# from the URL before counting, manipulating and storing URL. Enter here list
-# of all non wanted parameters. For example if you enter "id", one hit on
-# /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r
-# will be reported as 2 hits on /mypage.cgi?param=abc
-# This parameter is not used when URLWithQuery is 0 and can't be used with
-# URLWithQueryWithOnlyFollowingParameters.
-# Change : Effective for new updates only
-# Example: "PHPSESSID jsessionid"
-# Default: ""
-#
-URLWithQueryWithoutFollowingParameters=""
-
-
-# Keep or remove the query string to the referrer URL in the statistics for
-# external referrer pages. This is used to differentiate between the URLs of
-# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
-# are counted as two different referrer pages.
-# Change : Effective for new updates only
-# Possible values:
-# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
-# 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y")
-# Default: 0
-#
-URLReferrerWithQuery=0
-
-
-# AWStats can detect setup problems or show you important informations to have
-# a better use. Keep this to 1, except if AWStats says you can change it.
-# Change : Effective immediatly
-# Possible values: 0 or 1
-# Default: 1
-#
-WarningMessages=1
-
-
-# When an error occurs, AWStats outputs a message related to errors. If you
-# want (in most cases for security reasons) to have no error messages, you
-# can set this parameter to your personalized generic message.
-# Change : Effective immediatly
-# Example: "An error occurred. Contact your Administrator"
-# Default: ""
-#
-ErrorMessages=""
-
-
-# AWStat can be run with debug=x parameter to output various informations
-# to help in debugging or solving troubles. If you want to allow this (not
-# enabled by default for security reasons), set this parameter to 0.
-# Change : Effective immediatly
-# Possible values: 0 or 1
-# Default: 0
-#
-DebugMessages=0
-
-
-# To help you to detect if your log format is good, AWStats reports an error
-# if all the first NbOfLinesForCorruptedLog lines have a format that does not
-# match the LogFormat parameter.
-# However, some worm virus attack on your web server can result in a very high
-# number of corrupted lines in your log. So if you experience awstats stop
-# because of bad virus records at the beginning of your log file, you can
-# increase this parameter (very rare).
-# Change : Effective for new updates only
-# Default: 50
-#
-NbOfLinesForCorruptedLog=50
-
-
-# For some particular integration needs, you may want to have CGI links to
-# point to another script than awstats.pl.
-# Use the name of this script in WrapperScript parameter.
-# Change : Effective immediatly
-# Example: "awstatslauncher.pl"
-# Default: ""
-#
-WrapperScript=""
-
-
-# DecodeUA must be set to 1 if you use Roxen web server. This server converts
-# all spaces in user agent field into %20. This make the AWStats robots, OS
-# and browsers detection fail in some cases. Just change it to 1 if and only
-# if your web server is Roxen.
-# Change : Effective for new updates only
-# Possible values: 0 or 1
-# Default: 0
-#
-DecodeUA=0
-
-
-# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
-# things, that can not be tracked on other way, like:
-# - Javascript disabled
-# - Java enabled
-# - Screen size
-# - Color depth
-# - Macromedia Director plugin
-# - Macromedia Shockwave plugin
-# - Realplayer G2 plugin
-# - QuickTime plugin
-# - Mediaplayer plugin
-# - Acrobat PDF plugin
-# To enable all these features, you must copy the awstats_misc_tracker.js file
-# into a /js/ directory stored in your web document root and add the following
-# HTML code at the end of your index page (but before </BODY>) :
-#
-# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
-# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
-#
-# If code is not added in index page, all those detection capabilities will be
-# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
-# parameters are set to 1 to make results appear in AWStats report page.
-# If you want to use another directory than /js/, you must also change the
-# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
-# Change : Effective for new updates only.
-# Possible value: URL of javascript tracker file added in your HTML code.
-# Default: "/js/awstats_misc_tracker.js"
-#
-MiscTrackerUrl="/js/awstats_misc_tracker.js"
-
-
-
-#-----------------------------------------------------------------------------
-# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
-#-----------------------------------------------------------------------------
-
-# The following values allow you to define accuracy of AWStats entities
-# (robots, browsers, os, referers, file types) detection.
-# It might be a good idea for large web sites or ISP that provides AWStats to
-# high number of customers, to set this parameter to 1 (or 0), instead of 2.
-# Possible values:
-# 0 = No detection,
-# 1 = Medium/Standard detection
-# 2 = Full detection
-# Change : Effective for new updates only
-# Note : LevelForBrowsersDetection can also accept value "allphones". This
-# enable detailed detection of phone/pda browsers.
-# Default: 2 (0 for LevelForWormsDetection)
-#
-LevelForBrowsersDetection=2 # 0 disables Browsers detection.
- # 2 reduces AWStats speed by 2%
- # allphones reduces AWStats speed by 5%
-LevelForOSDetection=2 # 0 disables OS detection.
- # 2 reduces AWStats speed by 3%
-LevelForRefererAnalyze=2 # 0 disables Origin detection.
- # 2 reduces AWStats speed by 14%
-LevelForRobotsDetection=2 # 0 disables Robots detection.
- # 2 reduces AWStats speed by 2.5%
-LevelForSearchEnginesDetection=2 # 0 disables Search engines detection.
- # 2 reduces AWStats speed by 9%
-LevelForKeywordsDetection=2 # 0 disables Keyphrases/Keywords detection.
- # 2 reduces AWStats speed by 1%
-LevelForFileTypesDetection=2 # 0 disables File types detection.
- # 2 reduces AWStats speed by 1%
-LevelForWormsDetection=0 # 0 disables Worms detection.
- # 2 reduces AWStats speed by 15%
-
-
-
-#-----------------------------------------------------------------------------
-# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
-#-----------------------------------------------------------------------------
-
-# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
-# Frames are only available for report viewed dynamically. When you build
-# pages from command line, this option is not used and no frames are built.
-# Possible values: 0 or 1
-# Default: 1
-#
-UseFramesWhenCGI=1
-
-
-# This parameter asks your browser to open detailed reports into a different
-# window than the main page.
-# Possible values:
-# 0 - Open all in same browser window
-# 1 - Open detailed reports in another window except if using frames
-# 2 - Open always in a different window even if reports are framed
-# Default: 1
-#
-DetailedReportsOnNewWindows=1
-
-
-# You can add, in the HTML report page, a cache lifetime (in seconds) that
-# will be returned to the browser in HTTP header answer by server.
-# This parameter is not used when reports are built with -staticlinks option.
-# Example: 3600
-# Default: 0
-#
-Expires=0
-
-
-# To avoid too large web pages, you can ask AWStats to limit number of rows of
-# all reported charts to this number when no other limits apply.
-# Default: 1000
-#
-MaxRowsInHTMLOutput=1000
-
-
-# Set your primary language (ISO-639-1 language codes).
-# Possible values:
-# Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
-# Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
-# Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
-# French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
-# Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
-# Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
-# Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
-# Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
-# Ukrainian=ua, Welsh=cy.
-# First available language accepted by browser=auto
-# Default: "auto"
-#
-Lang="auto"
-
-
-# Set the location of language files.
-# Example: "/usr/share/awstats/lang"
-# Default: "./lang" (means lang directory is in same location than awstats.pl)
-#
-DirLang="/usr/share/awstats/lang"
-
-
-# Show menu header with reports' links
-# Possible values: 0 or 1
-# Default: 1
-#
-ShowMenu=1
-
-
-# You choose here which reports you want to see in the main page and what you
-# want to see in those reports.
-# Possible values:
-# 0 - Report is not shown at all
-# 1 - Report is shown in main page with an entry in menu and default columns
-# XYZ - Report shows column informations defined by code X,Y,Z...
-# X,Y,Z... are code letters among the following:
-# U = Unique visitors
-# V = Visits
-# P = Number of pages
-# H = Number of hits (or mails)
-# B = Bandwith (or total mail size for mail logs)
-# L = Last access date
-# E = Entry pages
-# X = Exit pages
-# C = Web compression (mod_gzip,mod_deflate)
-# M = Average mail size (mail logs)
-#
-
-# Show monthly summary
-# Context: Web, Streaming, Mail, Ftp
-# Default: UVPHB, Possible column codes: UVPHB
-ShowSummary=UVPHB
-
-# Show monthly chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: UVPHB, Possible column codes: UVPHB
-ShowMonthStats=UVPHB
-
-# Show days of month chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: VPHB, Possible column codes: VPHB
-ShowDaysOfMonthStats=VPHB
-
-# Show days of week chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: PHB, Possible column codes: PHB
-ShowDaysOfWeekStats=PHB
-
-# Show hourly chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: PHB, Possible column codes: PHB
-ShowHoursStats=PHB
-
-# Show domains/country chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: PHB, Possible column codes: PHB
-ShowDomainsStats=PHB
-
-# Show hosts chart
-# Context: Web, Streaming, Mail, Ftp
-# Default: PHBL, Possible column codes: PHBL
-ShowHostsStats=PHBL
-
-# Show authenticated users chart
-# Context: Web, Streaming, Ftp
-# Default: 0, Possible column codes: PHBL
-ShowAuthenticatedUsers=0
-
-# Show robots chart
-# Context: Web, Streaming
-# Default: HBL, Possible column codes: HBL
-ShowRobotsStats=HBL
-
-# Show worms chart
-# Context: Web, Streaming
-# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
-ShowWormsStats=0
-
-# Show email senders chart (For use when analyzing mail log files)
-# Context: Mail
-# Default: 0, Possible column codes: HBML
-ShowEMailSenders=0
-
-# Show email receivers chart (For use when analyzing mail log files)
-# Context: Mail
-# Default: 0, Possible column codes: HBML
-ShowEMailReceivers=0
-
-# Show session chart
-# Context: Web, Streaming, Ftp
-# Default: 1, Possible column codes: None
-ShowSessionsStats=1
-
-# Show pages-url chart.
-# Context: Web, Streaming, Ftp
-# Default: PBEX, Possible column codes: PBEX
-ShowPagesStats=PBEX
-
-# Show file types chart.
-# Context: Web, Streaming, Ftp
-# Default: HB, Possible column codes: HBC
-ShowFileTypesStats=HB
-
-# Show file size chart (Not yet available)
-# Context: Web, Streaming, Mail, Ftp
-# Default: 1, Possible column codes: None
-ShowFileSizesStats=0
-
-# Show operating systems chart
-# Context: Web, Streaming, Ftp
-# Default: 1, Possible column codes: None
-ShowOSStats=1
-
-# Show browsers chart
-# Context: Web, Streaming
-# Default: 1, Possible column codes: None
-ShowBrowsersStats=1
-
-# Show screen size chart
-# Context: Web, Streaming
-# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
-ShowScreenSizeStats=0
-
-# Show origin chart
-# Context: Web, Streaming
-# Default: PH, Possible column codes: PH
-ShowOriginStats=PH
-
-# Show keyphrases chart
-# Context: Web, Streaming
-# Default: 1, Possible column codes: None
-ShowKeyphrasesStats=1
-
-# Show keywords chart
-# Context: Web, Streaming
-# Default: 1, Possible column codes: None
-ShowKeywordsStats=1
-
-# Show misc chart
-# Context: Web, Streaming
-# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
-ShowMiscStats=a
-
-# Show http errors chart
-# Context: Web, Streaming
-# Default: 1, Possible column codes: None
-ShowHTTPErrorsStats=1
-
-# Show smtp errors chart (For use when analyzing mail log files)
-# Context: Mail
-# Default: 0, Possible column codes: None
-ShowSMTPErrorsStats=0
-
-# Show the cluster report (Your LogFormat must contains the %cluster tag)
-# Context: Web, Streaming, Ftp
-# Default: 0, Possible column codes: PHB
-ShowClusterStats=0
-
-
-# Some graphical reports are followed by the data array of values.
-# If you don't want this array (to reduce the report size for example), you
-# can set thoose options to 0.
-# Possible values: 0 or 1
-# Default: 1
-#
-# Data array values for the ShowMonthStats report
-AddDataArrayMonthStats=1
-# Data array values for the ShowDaysOfMonthStats report
-AddDataArrayShowDaysOfMonthStats=1
-# Data array values for the ShowDaysOfWeekStats report
-AddDataArrayShowDaysOfWeekStats=1
-# Data array values for the ShowHoursStats report
-AddDataArrayShowHoursStats=1
-
-
-# In the Origin chart, you have stats on where your hits came from. You can
-# include hits on pages that come from pages of same sites in this chart.
-# Possible values: 0 or 1
-# Default: 0
-#
-IncludeInternalLinksInOriginSection=0
-
-
-# The following parameters can be used to choose the maximum number of lines
-# shown for the particular following reports.
-#
-# Stats by countries/domains
-MaxNbOfDomain = 10
-MinHitDomain = 1
-# Stats by hosts
-MaxNbOfHostsShown = 10
-MinHitHost = 1
-# Stats by authenticated users
-MaxNbOfLoginShown = 10
-MinHitLogin = 1
-# Stats by robots
-MaxNbOfRobotShown = 10
-MinHitRobot = 1
-# Stats by pages
-MaxNbOfPageShown = 10
-MinHitFile = 1
-# Stats by OS
-MaxNbOfOsShown = 10
-MinHitOs = 1
-# Stats by browsers
-MaxNbOfBrowsersShown = 10
-MinHitBrowser = 1
-# Stats by screen size
-MaxNbOfScreenSizesShown = 5
-MinHitScreenSize = 1
-# Stats by window size (following 2 parameters are not yet used)
-MaxNbOfWindowSizesShown = 5
-MinHitWindowSize = 1
-# Stats by referers
-MaxNbOfRefererShown = 10
-MinHitRefer = 1
-# Stats for keyphrases
-MaxNbOfKeyphrasesShown = 10
-MinHitKeyphrase = 1
-# Stats for keywords
-MaxNbOfKeywordsShown = 10
-MinHitKeyword = 1
-# Stats for sender or receiver emails
-MaxNbOfEMailsShown = 20
-MinHitEMail = 1
-
-
-# Choose if you want the week report to start on sunday or monday
-# Possible values:
-# 0 - Week starts on sunday
-# 1 - Week starts on monday
-# Default: 1
-#
-FirstDayOfWeek=1
-
-
-# List of visible flags that link to other language translations.
-# See Lang parameter for list of allowed flag/language codes.
-# If you don't want any flag link, set ShowFlagLinks to "".
-# This parameter is used only if ShowMenu parameter is set to 1.
-# Possible values: "" or "language_codes_separated_by_space"
-# Example: "en es fr nl de"
-# Default: ""
-#
-ShowFlagLinks=""
-
-
-# Each URL, shown in stats report views, are links you can click.
-# Possible values: 0 or 1
-# Default: 1
-#
-ShowLinksOnUrl=1
-
-
-# When AWStats builds HTML links in its report pages, it starts those links
-# with "http://". However some links might be HTTPS links, so you can enter
-# here the root of all your HTTPS links. If all your site is a SSL web site,
-# just enter "/".
-# This parameter is not used if ShowLinksOnUrl is 0.
-# Example: "/shopping"
-# Example: "/"
-# Default: ""
-#
-UseHTTPSLinkForUrl=""
-
-
-# Maximum length of URL part shown on stats page (number of characters).
-# This affects only URL visible text, links still work.
-# Default: 64
-#
-MaxLengthOfShownURL=64
-
-
-# You can enter HTML code that will be added at the top of AWStats reports.
-# Default: ""
-#
-HTMLHeadSection=""
-
-
-# You can enter HTML code that will be added at the end of AWStats reports.
-# Great to add advert ban.
-# Default: ""
-#
-HTMLEndSection=""
-
-
-# You can set Logo and LogoLink to use your own logo.
-# Logo must be the name of image file (must be in $DirIcons/other directory).
-# LogoLink is the expected URL when clicking on Logo.
-# Default: "awstats_logo6.png"
-#
-Logo="awstats_logo6.png"
-LogoLink="http://awstats.sourceforge.net"
-
-
-# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
-# Default: 260/90
-#
-BarWidth = 260
-BarHeight = 90
-
-
-# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
-# change its look. To create a style sheet, you can use samples provided with
-# AWStats in wwwroot/css directory.
-# Example: "/awstatscss/awstats_bw.css"
-# Example: "/css/awstats_bw.css"
-# Default: ""
-#
-StyleSheet=""
-
-
-# Those color parameters can be used (if StyleSheet parameter is not used)
-# to change AWStats look.
-# Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex
-#
-color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF")
-color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCCCDD")
-color_TableTitle="000000" # Table title font color (Default = "000000")
-color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD")
-color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF")
-color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECECEC")
-color_TableBorder="ECECEC" # Table border color (Default = "ECECEC")
-color_text="000000" # Color of text (Default = "000000")
-color_textpercent="606060" # Color of text for percent values (Default = "606060")
-color_titletext="000000" # Color of text title within colored Title Rows (Default = "000000")
-color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA")
-color_link="0011BB" # Color of HTML links (Default = "0011BB")
-color_hover="605040" # Color of HTML on-mouseover links (Default = "605040")
-color_u="FFAA66" # Background color for number of unique visitors (Default = "FFAA66")
-color_v="F4F090" # Background color for number of visites (Default = "F4F090")
-color_p="4477DD" # Background color for number of pages (Default = "4477DD")
-color_h="66DDEE" # Background color for number of hits (Default = "66DDEE")
-color_k="2EA495" # Background color for number of bytes (Default = "2EA495")
-color_s="8888DD" # Background color for number of search (Default = "8888DD")
-color_e="CEC2E8" # Background color for number of entry pages (Default = "CEC2E8")
-color_x="C1B2E2" # Background color for number of exit pages (Default = "C1B2E2")
-
-
-
-#-----------------------------------------------------------------------------
-# PLUGINS
-#-----------------------------------------------------------------------------
-
-# Add here all plugin files you want to load.
-# Plugin files must be .pm files stored in 'plugins' directory.
-# Uncomment LoadPlugin lines to enable a plugin after checking that perl
-# modules required by the plugin are installed.
-
-# Plugin: Tooltips
-# Perl modules required: None
-# Add some tooltips help on HTML report pages.
-# Note that enabling this kind of help will increased HTML report pages size,
-# so server load and bandwidth.
-#
-#LoadPlugin="tooltips"
-
-# Plugin: DecodeUTFKeys
-# Perl modules required: Encode and URI::Escape
-# Allow AWStats to show correctly (in language charset) keywords/keyphrases
-# strings even if they were UTF8 coded by the referer search engine.
-#
-#LoadPlugin="decodeutfkeys"
-
-# Plugin: IPv6
-# Perl modules required: Net::IP and Net::DNS
-# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
-# addresses.
-# Note: If you are interested in having country report, you should use the
-# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
-#
-#LoadPlugin="ipv6"
-
-# Plugin: HashFiles
-# Perl modules required: Storable
-# AWStats DNS cache files are read/saved as native hash files. This increases
-# DNS cache files loading speed, above all for very large web sites.
-#
-LoadPlugin="hashfiles"
-
-# Plugin: GeoIP
-# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
-# Country chart is built from an Internet IP-Country database.
-# This plugin is useless for intranet only log files.
-# Note: You must choose between using this plugin (need Perl Geo::IP module
-# from Maxmind, database more up to date) or the GeoIPfree plugin (need
-# Perl Geo::IPfree module, database less up to date).
-# This plugin reduces AWStats speed of 8% !
-#
-#LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat"
-
-# Plugin: GeoIPfree
-# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
-# Country chart is built from an Internet IP-Country database.
-# This plugin is useless for intranet only log files.
-# Note: You must choose between using this plugin (need Perl Geo::IPfree
-# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
-# module from Maxmind, database more up to date).
-# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
-# module, so install it from elsewhere (from www.cpan.org for example).
-# This plugin reduces AWStats speed of 10% !
-#
-LoadPlugin="geoipfree"
-
-# Plugin: GeoIP_Region_Maxmind
-# Perl modules required: Geo::IP (from Maxmind)
-# This plugin add a chart of hits by regions. Only regions for US and
-# Canada can be detected.
-# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
-# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
-# on Windows but it works great on Linux with default Perl.
-# You need to purchase a license from Maxmind to get/use the Region database.
-# This plugin reduces AWStats speed.
-#
-#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
-
-# Plugin: GeoIP_City_Maxmind
-# Perl modules required: Geo::IP (from Maxmind)
-# This plugin add a chart of hits by cities (with country and regions
-# informations for major countries).
-# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
-# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
-# on Windows but it works great on Linux with default Perl.
-# You need to purchase a license from Maxmind to get/use the City database.
-# This plugin reduces AWStats speed.
-#
-#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
-
-# Plugin: GeoIP_ISP_Maxmind
-# Perl modules required: Geo::IP (from Maxmind)
-# This plugin add a chart of hits by ISP.
-# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
-# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
-# on Windows but it works great on Linux with default Perl.
-# You need to purchase a license from Maxmind to get/use the ISP database.
-# This plugin reduces AWStats speed.
-#
-#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
-
-# Plugin: GeoIP_Org_Maxmind
-# Perl modules required: Geo::IP (from Maxmind)
-# This plugin add a chart of hits by Organization name
-# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
-# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
-# on Windows but it works great on Linux with default Perl.
-# You need to purchase a license from Maxmind to get/use the Org database.
-# This plugin reduces AWStats speed.
-#
-#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
-
-# Plugin: UserInfo
-# Perl modules required: None
-# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
-# reports for each login value.
-# A text file called userinfo.myconfig.txt, with two fields (first is login,
-# second is text to show, separated by a tab char) must be created in DirData
-# directory.
-#
-#LoadPlugin="userinfo"
-
-# Plugin: HostInfo
-# Perl modules required: Net::XWhois
-# Add a column into host chart with a link to open a popup window that shows
-# info on host (like whois records).
-#
-#LoadPlugin="hostinfo"
-
-# Plugin: ClusterInfo
-# Perl modules required: None
-# Add a text (for example a full hostname) in cluster reports for each cluster
-# number.
-# A text file called clusterinfo.myconfig.txt, with two fields (first is
-# cluster number, second is text to show) separated by a tab char. must be
-# created into DirData directory.
-# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
-# use a personalized log format that contains %cluster tag.
-#
-#LoadPlugin="clusterinfo"
-
-# Plugin: UrlAliases
-# Perl modules required: None
-# Add a text (Page title, description...) in URL reports before URL value.
-# A text file called urlalias.myconfig.txt, with two fields (first is URL,
-# second is text to show, separated by a tab char) must be created into
-# DirData directory.
-#
-#LoadPlugin="urlalias"
-
-# Plugin: TimeHiRes
-# Perl modules required: Time::HiRes (if Perl < 5.8)
-# Time reported by -showsteps option is in millisecond. For debug purpose.
-#
-#LoadPlugin="timehires"
-
-# Plugin: TimeZone
-# Perl modules required: Time::Local
-# Allow AWStats to correct a bad timezone for user of some IIS that use
-# GMT date in its log instead of local server time.
-# This module is useless for Apache and most IIS version.
-# This plugin reduces AWStats speed of 40% !!!!!!!
-#
-#LoadPlugin="timezone +2"
-
-# Plugin: Rawlog
-# Perl modules required: None
-# This plugin adds a form in AWStats main page to allow users to see raw
-# content of current log files. A filter is also available.
-#
-#LoadPlugin="rawlog"
-
-# Plugin: GraphApplet
-# Perl modules required: None
-# Supported charts are built by a 3D graphic applet.
-#
-#LoadPlugin="graphapplet /awstatsclasses" # EXPERIMENTAL FEATURE
-
-
-
-#-----------------------------------------------------------------------------
-# EXTRA SECTIONS
-#-----------------------------------------------------------------------------
-
-# You can define your own charts, you choose here what are rows and columns
-# keys. This feature is particularly useful for marketing purpose, tracking
-# products orders for example.
-# For this, edit all parameters of Extra section. Each set of parameter is a
-# different chart. For several charts, duplicate section changing the number.
-# Note: Each Extra section reduces AWStats speed by 8%.
-#
-# WARNING: A wrong setup of Extra section might result in too large arrays
-# that will consume all your memory, making AWStats unusable after several
-# updates, so be sure to setup it correctly.
-# In most cases, you don't need this feature.
-#
-# ExtraSectionNameX is title of your personalized chart.
-# ExtraSectionCodeFilterX is list of codes the record code field must match.
-# Put an empty string for no test on code.
-# ExtraSectionConditionX are conditions you can use to count or not the hit,
-# Use one of the field condition
-# (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
-# and a regex to match, after a coma. Use "||" for "OR".
-# ExtraSectionFirstColumnTitleX is the first column title of the chart.
-# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
-# extract value from
-# (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
-# and how to extract the value (using regex syntax). Each different value
-# found will appear in first column of report on a different row. Be sure
-# that list of different possible values will not grow indefinitely.
-# ExtraSectionFirstColumnFormatX is the string used to write value.
-# ExtraSectionStatTypesX are things you want to count. You can use standard
-# code letters (P for pages,H for hits,B for bandwidth,L for last access).
-# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
-# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
-# MaxNbOfExtraX is maximum number of rows shown in chart.
-# MinHitExtraX is minimum number of hits required to be shown in chart.
-#
-
-# Example to report the 20 products the most ordered by "order.cgi" script
-#ExtraSectionName1="Product orders"
-#ExtraSectionCodeFilter1="200 304"
-#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
-#ExtraSectionFirstColumnTitle1="Product ID"
-#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
-#ExtraSectionFirstColumnFormat1="%s"
-#ExtraSectionStatTypes1=PL
-#ExtraSectionAddAverageRow1=0
-#ExtraSectionAddSumRow1=1
-#MaxNbOfExtra1=20
-#MinHitExtra1=1
-
-
-# There is also a global parameter ExtraTrackedRowsLimit that limits the
-# number of possible rows an ExtraSection can report. This parameter is
-# here to protect too much memory use when you make a bad setup in your
-# ExtraSection. It applies to all ExtraSection independently meaning that
-# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
-# If you know an ExtraSection will report more rows than its value, you should
-# increase this parameter or AWStats will stop with an error.
-# Example: 2000
-# Default: 500
-#
-ExtraTrackedRowsLimit=500
-
-
-#-----------------------------------------------------------------------------
-# INCLUDES
-#-----------------------------------------------------------------------------
-
-# You can include other config files using the directive with the name of the
-# config file.
-# This is particularly useful for users who have a lot of virtual servers, so
-# a lot of config files and want to maintain common values in only one file.
-# Note that when a variable is defined both in a config file and in an
-# included file, AWStats will use the last value read for parameters that
-# contains one value and AWStats will concat all values from both files for
-# parameters that are lists of values.
-#
-
-Include "/etc/awstats/awstats.conf.local"
-
projects / chef.git / commitdiff